background image

OPERATING INSTRUCTIONS

WARNING

Do not disassemble the the fan heater for 

maintenance with a method which is not in 

the instructions. Any maintenance other 

than user maintenance should be performed 

by specialized serviceman.

Do not attempt to use the fan heater before 

it is completely and properly installed.

Do not tamper with the fan heater. 

Use this fan heater only in the manner 

intended by the manufacturer. 

If you have any questions, contact the 

manufacturer. Any other use not 

recommended by the manufacturer may 

cause fire, electric shock, or injury to 

persons.
See “MAINTENANCE” on pages 14-15 for 

user maintenance.

Please operate as shown in the following after installation. (Fig.16)

Switching operating modes requires a slight delay to change the internal shutter positions.

 (The light mode and night light mode excluded.)
Pick-A-Flow™ switch is not available to set ventilation air volume while operating in the heating and 

ventilating mode. (Adequate ventilation air volume is provided to reduce heat loss in a bathroom)

Timer function

Example 1

The heat switch circuit will turn off in 2 hours if a user forgets to turn off the switch.

If this happens, move the “Heat” or “Vent” switch back to the “OFF” position to reset the 

timer function and resume operation according to the switch status.

*

Attach switch labels to the wall 

  

switch as shown above. (Fig.16)

Fig.16

Switch labels

Light

Heat

Vent

For Model 

FV-0511VH1

For Model 

FV-0511VHL1

Night-Light

Heat

Vent

English

13

Switch

Mode

Function

“Heat”

Heating

Heating the bathroom

“Vent”

Ventilating

Ventilating the bathroom

Both of 

“Heat”

and 

“Vent”

Heating

and 

Ventilating

Exhausting moisture 

while keeping the 

bathroom warm

“Light”

Light

Turns on the main light

“Night-Light” Night-Light

Turns on the night light

Mode

Switch

2 hours 

later

Heating

Power off

Heat

Vent

Example 2

Heat

Vent

ON

OFF

ON

OFF

2 hours 

later

Heating

and

Ventilating

Ventilating

Heat

Vent

Heat

Vent

ON

ON

ON

ON

*

OPERATION

Содержание FV-0511VH1

















Отзывы: