English
5
(FV-0511VHL1 only)
FCC Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
There is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning this product on and off, the user is encouraged to try to correct the
interference by one of the following measures:
Warning: This equipment must be installed by qualified person in accordance with the provided
installation instructions; and all applicable codes and standards. Also, any changes or
modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect equipment to an outlet on a different circuit from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
The Panasonic fan heater uses a sirocco fan driven by a DC motor powered by an integral
transformer. The motor is designed to have long operating life, high dynamic response,
higher speed ranges and energy efficiency. The grille covering the fan heater body is attached
with the mounting springs for quick removal. A shutter driven by a stepper motor is designed to
shift the airflow between the heating and ventilating functions. A damper for preventing
counter-flow is provided. The blower uses a high-capacity sirocco fan developed to reduce
noise level. The heater for this fan heater is a 1600W PTC heater. A thermostat and thermal cut-off
switch have been added for safety in case of an abnormal temperature rise.
The lighting unit has a 10W LED light and produces almost the same illumination as that of a
standard 40W incandescent light. The night light consumes around 0.1 to 0.4W.
This product is Type IC-inherently Protected. (FV-0511VHL1 only)
SDoC Responsible Party: Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102
Customer Call Center: 1-866-292-7299
DESCRIPTION
