Bend close to duct adaptor
English
4
CAUTION
Make sure that the electric service supply voltage is AC 120 V, 60 Hz.
Do not install this fan heater where interior room
temperature may exceed 104 ˚F (40 ˚C).
Not for use in cooking area. (Fig.A)
To disconnect fan heater, turn all switches to off, and
shut off power to the circuit.
When one switch is connected with two or more products in parallel, the fan heater
may not function. Therefore, parallel connection should not be allowed.
Use the ventilating mode for general ventilation only.
Do not use the fan heater to exhaust hazardous or
explosive materials and vapors.
Floor
45
°
45°
Cooking
equipment
Fig.A
(Cooking area)
Do not install above or
inside this area
NOTICE
Provide make up air for proper ventilation.
Do not install the fan heater where ducts are configured as shown below.
Squeezed duct
Successive bending
Excessive bending
Adaptor
SAVE THESE INSTRUCTIONS
This fan heater is hot when in use. To avoid burns, do not let bare skin touch the hot
surfaces of the fan heater. Keep combustible materials, such as furniture, pillows,
bedding, papers, clothes, curtains, etc. at least 3 feet(0.9m) away from the fan heater.
To prevent a possible fire, do not block air intakes or exhaust in any manner.
If the fan heater malfunctions, do not continue to use it. Disconnect power at service
panel and have fan heater inspected by a reputable electrician before using it again.
Never use gasoline, benzene, paint thinner or any other such chemicals for cleaning
the fan heater.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as
this may cause an electric shock or fire, or damage the fan heater.
Do not tamper with the fan heater.
IMPORTANT INSTRUCTIONS CONTINUED
