Basic Performance (High capacity/High speed)
Basic Performance (Expansion)
The high-level basic performance provides sufficient room for future
equipment expansion as well as a rich variation.
7
■
Abundant program capacity -
32
ksteps (16 ksteps for C14)
■
High-speed scan at
0.32
µ
sec for instruction processing
■
Abundant number of I/O points - Maximum
300
(Up to 382 points possible by using FP0 expansion units and add-on cassettes)
●
Expansion units (E16R, E30R, EFP0) can be connected up to eight units.
●
Connection by using the cable included in each expansion unit.
Max.
300
channels
Max. 8 units
●
Two or more E16 can't be connected serially.
●
E16 can be sandwiched with E30*
* E30 requires an external power supply
Note: Total expansion cable length: 160 cm max.
An 80-cm expansion cable is
also available as an option.
E30
E30
E30
C60
E30
E30
C60
C60
E16
E16
C60
E16
E30
When the user cannot predict the number of I/O points required in the future for his machine or equipment, he is
uncertain in selecting a PLC model. FP-X solves user concerns with a maximum of 300 I/O channels. The number
can even be increased up to 382 points by using the add-on cassettes and FP0 expansion units.
■
When further expansion or functions are required, use the existing
FP0 expansion unit.
Max. 7 units (210 points)
Max. 96 points
Expansion FP0 adapter (AFPX-EFP0)
The unified unit height of 90 mm makes
the panel surface look clean.
E30
E30
C60
Controls Specifications
■
Equipped with an independent comment memory
Equipped with an independent comment memory separate from the program memory.
All of
100,000
I/O comments,
5,000
lines of line-space comments, and
5,000
lines
of remark comments are saved in FP-X together with programs.
*Input comments do not decrease the program capacity.
The program capacity of 32 ksteps, exceeding the capacity of most compact PLCs,
can flexibly handle a wide variety of applications requiring future equipment
expansion. An adequate comment area has of course been reserved. Free comment
entry makes the program easy to understand during verification.
C14
C30, C60
C14
32
k
10
k
16
k
FP0
FP-X
C30/C60
FP-X
10k
20k
30k
steps
●
Program capacity
High-speed processing is often required for small-scale equipment control
such as serial data communication, network construction or PID temperature
control. High-speed scanning at 0.32
µ
sec/step (basic instruction) easily meets
such requirements.
(Ex.) In the case of a 5-kstep program consisting of 40% basic instructions
and 60% applied instructions (Data tansfer and operation instructions),
Scan time:
1.9 ms
(measured time)
0.5
1.0
0.32
µ
sec
0.9
µ
sec
µ
sec
FP-X
FP0
●
Processing speed of the basic
instructions (ST, OR, AND, OT etc)
NG
OK
The units can be tightly
mounted adjacent to each
other with the cable bent
inside between the units for
saving space.
All control units can be expanded by up to 3 FP0 expansion units via an adapter.
Applications can be expanded by using [Transistor outputs], [Analog input/outputs],
[Thermocouple input] and [I/O link (network)].
* Only one expansion FP0 adapter unit can be attached to a control unit.
Up to 7 FP-X expansion units can be used when the expansion FP0 adapter is attached.
6
Item
Specifications
Item
Specifications
Program method
Control method
Program memory
Program capacity
Operation processing speed
Basic instructions
Applied instructions
External inputs (X)
External outputs (Y)
Internal relay (R)
Special internal relay (R)
Link relay (L)
Timer/counter (T/C)
Data register (DT)
Link data register (LD)
Special data register (DT)
Index register (I0 to ID)
Master control relay (MCR)
Number of labels (LOOP)
Number of differentiations
Number of stepladders
Number of subroutines
Number of interruption programs
High-speed counter
*2
Relay symbol method
Cyclic operation method
Flash ROM built-in (no battery backup required)
16 ksteps (C14), 32 ksteps (C30, C60)
Basic instruction 0.32
µ
s/step
111
216
1760 points
*1
1760 points
*1
4096 points
192 points
2048 points
12285 words (C14), 32765 words (C30, C60)
256 words
374 words
14 words
256 points
256 labels
Up to program capacity
1000 stages
500 subroutines
Relay output type: 15 programs (14 external, 1 constant)
Transistor output type: 9 programs (8 external, 1 constant)
0.5 ms to 30 s
2 points (0 to 1000) (C14, C30) 4 points (0 to 1000) (C60)
Possible
Equipped (usable only when AFPX-MRTC is installed)
*5
Data register (32765 words)
Counter 16 points (1008 to 1023), Internal relay 128 points
(R2480 to R255F), Data register 55 words
The memory allocated in the storage area by the
system register (only when a battery is installed)
*6
C14: 1230 days (actual operation 10 years at 25
°
C)
C30, C60: 990 days (actual operation 10 years at 25
°
C)
C14: 780 days (actual operation 10 years at 25
°
C)
C30, C60: 680 days (actual operation 10 years at 25
°
C)
(More than two batteries can be installed in C30 and C60.
In this case, the battery life is extended several times)
Capable (4 or 8 characters selectable)
Watch dog timer, program syntax check
Capable (328 KB) (backup battery not required)
All of I/O comments, remark comments, and line-space comments can be stored.
Max 16 units, link relay 1024 points, link register 128 words
(No data transfer or remote programming)
Capable
Backup by F12,
P13 commands
Auto-backup
at power failure
(when no power is
supplied)
After installing
AFPX-MRTC
Before installing
AFPX-MRTC
*1 The actual usable number of points is restricted by the hardware.
*2 Specification at the rated input voltage of 24 V DC, 25
°
C. Frequency may be lower due to the voltage and
temperature. The countable frequency also changes depending on the number of channels used.
*3 The pulse I/O cassette cannot be used for the control units (transistor output type).
*4 Max frequency may vary by the method of operation. Please refer to the manual for details.
*5 Calendar accuracy at 0
°
C: 119 sec/month or less, 25
°
C: 51 sec/month or less, 55
°
C: 148 sec/month or
less (Real-time clock requires a battery.)
*6 When data is stored in the storage area while the battery is not installed, the data is not cleared and the
data value may be indefinite. The same condition occurs when the battery is exhausted.
*7 The number of possible rewrites is 10,000 or less.
Built-in (Transistor output): 100 kHz x 2 ch + 20 kHz x 2 ch
Pulse I/O cassette (for the relay output type only):
One unit (one axis) 100 kHz, or two units (two axes) 80 kHz
Relay output type: Total 14 points (including the high-speed counter)
Transistor output type: Total 8 points (including the high-speed counter)
Total 1024 points: timer capable of counting
(1 ms, 10 ms, 100 ms, 1 s) x 32767
Counter capable of counting 1 to 32767
Pulse catch input / interrupt input
Periodical interrupt
Potentiometer
Constant scan
Real-time clock
Flash ROM
backup
*7
Battery backup
Battery life
Password
Self-diagnosis function
Comment storage
PLC link function
Rewriting in RUN mode
Pulse output
*4
Built-in (Transistor output): single-phase 8 ch (50 kHz x 4 ch + 10 kHz x 4 ch)
Built-in (Relay output): single-phase 8 ch (10 kHz x 8 ch)
Pulse I/O cassette
*3
: single-phase 2 ch (80 kHz x 2 ch)
In addition to the supplied 8-cm expansion cable, 30-cm and 80-cm types are available as options,
allowing the units to be arranged more freely. (Total expansion cable length: 160 cm max.)
FP0-E8X
FP0-E16X
FP0-E8YT
FP0-E8YRS
FP0-E16YT
FP0-E32T
FP0-E8RS
FP0-E16RS
FP0-A21
FP0-A80
FP0-A04V
FP0-A04I
FP0-TC4
FP0-TC8
FP0-IOL
FP0-CCL
FP0-E32RS*
2
FP0-RTD6*
2
FP0-DPS2*
2
Product number
Product number
Specifications
Specifications
8 ch. DC input, MIL connector
16 ch. DC input, MIL connector
8 ch. transistor output, MIL connector
8 ch. relay output, screw terminal block
16 ch. transistor output, MIL connector
16 ch. DC input, 16 ch. transistor output,
MIL connector
4 ch. DC input, 4 ch. relay output,
screw terminal block
8 ch. DC input, 8 ch. relay output,
screw terminal block
Analog 2 ch. input, 1 ch. output
Analog 8 ch. input
Analog (voltage) 4 ch. output
Analog (current) 4 ch. output
Thermocouple 4 ch. input
Thermocouple 8 ch. input
I/O link unit
CC-link unit
16ch DC input, 16ch relay output
screw terminal block
6ch RTD input
PROFIBUS remote I/O unit
*2 Provided from Panasonic Electric Works Europe AG
We also have other units. Please refer to the part number
list at the end of this catalog.