Panasonic FP? Positioning Unit RTEX Скачать руководство пользователя страница 100

Страница: 100 / 288

7-48

Axis [Group]

The axis numbers and group names to be monitored.

Synchronous

group

Displays the current synchronous group.

Synchronous

mode

Displays the current synchronous mode.

Synchronous

condition

Displays the current synchronous state (synchronous or asynchronous).

Click [Change synchronous] to display the dialog for changing the synchronous
setting.

Current value

Monitor the feedback values after the unit system conversion for each axis.

Current value

update

Click [Current value update] to display the dialog for inputting value to change
the preset value.

Unit

The unit of position for each axis specified in the parameter settings.

JOG target speed

Monitor and display the target speed in the JOG operation.

Click [Change] to change the target speed for the JOG operation.

JOG [+]

Click [+] to perform the forward rotation.

JOG [-]

Click [-] to perform the reverse rotation.

Table number

Indicate the table number to perform the teaching.

Click [Teaching] to change the table number for the teaching and register the

current value.

State of axis]

The operating states of axes or error and warning occurrences.

Error code

The latest error code when an error occurred.

Error clear

Clear the error by clicking this button, when an error occurred.

Warning code

Indicate the latest warning code when a warning occurs.

Warning clear

Clear the warning by clicking this button, when a warning occurred.

Speed rate

The target speed of the home return specified in the parameter settings for

each axis is regarded as 100%, and the operation is executed in the specified

speed rate.

Clicking [Speed rate] shows the dialog for inputting the value.

The speed rate changed here is effective only in the tool operation, and it

changes to the original speed rate automatically once the tool operation quits.

Note:

If an recoverable error occurred in the positioning unit RTEX, click [Error Clear] to clear the error.
If a warning occurred in the positioning unit RTEX, click [Warning Clear] to clear the warning.

2. Click [Teaching] after stopping the axis at the desired position by the JOG operation, and input

the table number to execute the teaching operation.

3. Click [OK] after inputting the table number. The current value is registered for the movement

amount of the specified table number. Also, if the axis that the teaching operation is performed

is the interpolation axis, the current value is registered for the movement amount of the

equivalent coordinate in the interpolation group.

Note:

•

The control method for the table number that the teaching operation was performed is automatically

changed to “Absolute”.

•

The result of the teaching becomes effective once the tool operation quits and the setting data is

downloaded to the positioning unit RTEX.

Содержание FP? Positioning Unit RTEX

































































































































































































































































































Результаты поиска

Содержание FP? Positioning Unit RTEX

Отзывы:

Похожие инструкции для FP? Positioning Unit RTEX

Бренды по названию

Популярные бренды

Panasonic FP? Positioning Unit RTEX, Техническое руководство

Результаты поиска

Содержание FP? Positioning Unit RTEX

Отзывы:

Похожие инструкции для FP? Positioning Unit RTEX

Бренды по названию

Популярные бренды