Panasonic FP OPC Server Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 93

background image

3 Graphical User Interface (GUI)

‒ The serial communication settings are stored in the file "PxMEWCOMM.INI".
‒ The Ethernet communication settings are stored in the file “PxMewMultiEther.dat”.

• From version 2.100, communication is done via the PxMewnet manager. In former

versions (lower than 2.100) the communication is done via the NAiS MEWNET manager,
which stores the communication settings in different files. To keep the settings, please
refer to the corresponding troubleshooting section.

Related topics

3.7.1 Serial Communication Settings

If you select “C-Net (RS232, UBS)” as the network type, the following options are available:

Parameter

Description

“Port number”

Select the port number.

“Baud rate”

Depending on the PLC, select a baud rate between 1200 and 115200bit/
s for communication between PLC and PC. The default setting is
9600bit/s.

“Data length”

Select either 7 or 8bits (default setting: 8 bit).

“Stop bits”

Select either 1 or 2 bits (default setting: 1 bit).

“Parity”

Select the parity setting (default setting: odd).

“Timeout”

Set a timeout from 0 to 60s to connect to the PLC (default setting: 5s).

“Automatic
communication setting”

The software will automatically find matching communication settings
(default: all check boxes are activated).
Warning: Disabled parameters will be excluded from automatic
configuration.

Note

The FP OPC Server automatically searches for the suitable parameters unless you have
deactivated this feature.

3.7.2 Ethernet communication settings

The Ethernet communication settings can only be accessed via the channel properties. Set
the communication parameters according to your hardware. This connection is based on
TCP/IP protocol.

Set or change the following parameters if necessary:

ACGM0143V4EN

69

«
...
67
68
69
70
71
...
»

Содержание FP OPC Server






























































































Отзывы:

Нет отзывов

Похожие инструкции для FP OPC Server

Бренд: Ickle Bubba Страницы: 23

7000-2 - Escalade RAID Controller

Бренд: 3Ware Страницы: 2

Origami 4M-006-01

Бренд: 4 Moms Страницы: 28

EtherNetIP ControlPlex CPC12EN

Бренд: E-T-A Страницы: 28

Бренд: Eaton Страницы: 6

Бренд: Eaton Страницы: 35

Бренд: Eaton Страницы: 18

Бренд: Eaton Страницы: 73

Бренд: Eaton Страницы: 4

Cutler-Hammer IQ DP-4000

Бренд: Eaton Страницы: 87

Бренд: Eaton Страницы: 14

Бренд: Eaton Страницы: 36

Бренд: Galaxy Control Systems Страницы: 5

Бренд: Eaton Страницы: 2

Бренд: Kampmann Страницы: 5

WisLink LPWAN RAK5146

Бренд: RAKwireless Страницы: 9

CURTIS DC Series

Бренд: NOCO Genius Страницы: 2

Бренд: TimeTec Security Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды