Panasonic FOMA P900iV, Руководство пользователя

Страница: 88 / 404

Making/Receiving
Video-phone
Calls
86
Making
a
Video-phone
Call
Messages Reasons
Check the number and retry You have dialed a wrong phone number.
Busy The line is busy.
Out of service area or power off The dialed party’s phone is out of the service area or turned off.
Driving mode The dialed party’s phone is in Drive Mode.
Failed to connect Reason other than above.
●
Note that when you make a video-phone call while sending an image set for “Camera off” of “Select image”, you will be
charged for the digital transmission.
●
You can make video-phone calls to any DoCoMo video-phone, no matter the type.
●
You cannot make video-phone calls to phones that do not support 3G-324M (see page 84).
●
If you dial 110, 119 or 118 using the video-phone function, the number will automatically dial out as a voice call.
●
You cannot take voice calls or exchange mail and Messages R/F during video-phone calls. Incoming mail and
Messages R/F will be held at the i-mode center. You can retrieve them using “Check new message”, when you end the
video-phone call. However, you can receive the Short Message (SMS) during a video-phone call.
If you have an incoming call during a video-phone call, the “Missed call” icon will be displayed when you end the
video-phone call, and it will be stored in the Received Call Record. (The “Missed call” icon might not appear and the
incoming call record might not be kept depending on the contracts and settings for the Voice Mail, Call Waiting, and Call
Forwarding Services.)
●
During Hands-free use, be sure to keep the FOMA phone away from your ears. Otherwise, you could affect or damage
your hearing.
●
If the battery runs low during a video-phone call, the message “Recharge battery” appears and the substitute image is
sent to the other party. However, if you set Chara-den for a substitute image, the “Fixed” substitute image is displayed.
If you charge the battery during a video-phone call, the image set for “Camera off” of “Select image” is displayed.
●
You cannot dial video-phone calls by entering the phone number when “Keypad dial lock”, “Restrict dialing” or “Self
mode” is activated.
●
The International Video-phone Service is available using the DoCoMo International Call Service “WORLD CALL”. (See
page 68)
Information
When a video-phone call cannot be connected, the reason is displayed. (The displayed reason might not be the
same as the actual reason depending on the dialed party’s phone and contract for network services.)
If you are not connected, the video-phone call automatically switches to dialing at 32K or to the voice call.
●
The video-phone call by 32K speed is provided to connect with PHSs and similar devices that can connect at 64K
depending on the network conditions. When you dial a 64K video-phone call to a phone that can only connect at 32K,
the dialing speed will be switched automatically to 32K.
※
The same digital transmission charge applies to the 32K video-phone connection and 64K digital connection.
●
Video-phone calls cannot be connected to phones if they do not support the video-phone function, are out of the
service area, or are switched off. If you have set “Voice call auto SW” to “ON” and attempt to dial a phone that does
not have the video-phone function, the video-phone call will be cut off and the number will be redialed as a voice call.
Note that this setting might not work if you call an ISDN synchronous 64K or PIAFS access point or an ISDN
video-phone that does not support 3G-324M (see page 84) (as of May 2004), or if you dial the wrong number.
Nevertheless, you could be charged for the call.
●
Once the video-phone call has started communications, you cannot make calls to the voice call.
Voice call auto SW “ON” Voice call auto SW “OFF”
Could not connect by dialing at 64K. Dial again at 32K. Dial again at 32K.
Could not connect by dialing at 32K. Dial again by the voice call. Does not dial again.