Panasonic FOMA P900iV, Руководство пользователя

Страница: 64 / 404

Before
Using
your
FOMA
P
hone
62
Battery
L
evel
Clock
Setting
<Clock Setting>
Setting Date and Time
You can set the date and time for the FOMA phone’s internal clock.
The set date and time will appear in the Stand-by and other displays.
Clock Clock setting Enter year, month, date
and time
Use to move the cursor and the numeric keys to enter numbers.
●
Enter the A.D. year.
●
Enter the time in the 24-hour format.
To enter 9:15 p.m., press .
1
●
You can also set Clock during a call.
●
If you enter a wrong number (such as “13” for the month), press to cancel it; then enter the correct number.
●
Note that the following functions cannot be used unless the clock is set.
Current time display during calls (see pages 66, 84), Alarm (see page 223), Schedule (see page 228), ToDo (see page
239), Software update (see page 374), and i-
α
ppli auto start (see page 102 of “Applications” manual)
●
The FOMA phone has an internal backup battery. The set time is stored in the internal backup battery so is kept even
when you change the battery. However, the time could be reset if the battery is detached for two or more weeks. In this
case, charge the FOMA phone and then set the clock again. Also, when using the FOMA phone for the first time after
purchase, attach the battery to the FOMA phone and then charge it. This will charge the internal backup battery.
●
This function supports clock settings from 00:00 January 1 2003 through to 23:59 December 31 2099.
●
When the setting is 23:59 December 31 2099, the clock display will not update.
Information
■
What happens when the battery runs out?
The display on the right appears and the empty battery alarm sounds for approximately six
seconds. To stop this alarm, press any key other than and . Approximately one
minute later the FOMA phone will be turned off.
●
During a call, you will also hear a beeping tone. Approximately 20 seconds later your call will
be cut and then one minute later the FOMA phone will be turned off.
●
The tone will not sound while “Manner mode” or “Super silent” is activated, or when “Phone
vol.” is set to “Silent” or “LVA tone” is set to “OFF” in “Original”.