Panasonic FOMA P900iV, Руководство пользователя

Страница: 109 / 404

Making/Receiving
Video-phone
Calls
107
A video-phone call comes in from a stored phone number.
●
The ring tone for remote monitoring sounds when you have a video-phone call from a
phone number stored as “Other ID” of “Remote monitor”. (You cannot change the ring
tone for remote monitoring.)
The ring tone sounds at the volume set for “Ring volume”, but at “Level 2” if you have set
“Step” or “Level 1” or below.
●
The illumination color for incoming remote monitoring calls is “Gradation”, and its
flickering pattern is “Standard”.
●
When a remote monitoring call comes in, “Open phone” is disabled.
●
Even when remote monitoring is set, you can press to take the video-phone call before automatic
answering and send the image through your camera to the other phone.
Also, if you press or , the video-phone call will start by sending the image set for “Camera off” of
“Select image” to the caller.
●
If you press when a remote monitoring call comes in, the call will be cut and remote monitoring will not be
done.
●
To make a remote monitoring call, notify your Caller ID and make a video-phone call.
●
If the caller does not notify their Caller ID, remote monitoring will not be done and the call will be treated as an
ordinary incoming video-phone call.
1
The call is taken automatically after the ringing time set for
“Remote monitor”, and remote monitoring begins.
The camera setting goes “ON” regardless of the setting of “Camera image sending”, and the
image through your camera and voice will be sent. (You cannot switch to a substitute
image.)
●
You cannot set voice-only remote monitoring.
●
The photo image and voice of the other party cannot be displayed or played back.
● During remote monitoring you cannot operate other than pressing to end remote
monitoring.
2
End remote monitoring.
Remote monitoring ends when either the dialing side or receiving side presses .
3
Be Monitored by Video-phone
Remote
Monitor
P.33 P.33