18
FURTHER INFORMATION
Room temperature: about 5
℃
～
35
℃
(dew-point temperature: 2
℃ or above
)
Relative humidity: about 30%
～
85%
Function of HEPA composite filter
With the bio-sterilization and super allergy buster functions of the HEPA composite filter, allergic
substances (pollen, annoying dung of dead mites), fungus, mold bacteria can be inhibited.
Bio-sterilization: Inhibit fungus
4
, mold bacteria
5
.
Testing authority: (Foundation)Japan Food Research Laboratory
Testing method: Verify the method to prevent mold bacteria (Halo method)
Inhibiting method: Contact with bio-sterilization
Target: Mold bacteria trapped in the filter
Testing result: Verify the effectiveness of preventing mold bacteria using the Halo test No. 207060074-002
Testing authority: (Foundation)Japan Food Research Laboratory.
Testing method: Confirmation by using Halo method.
Inhibiting method: Contact with bio-sterilization.
Target: Bacteria trapped in the filter
Testing result: More than 99% inhibition No. 204051292-002
4
5
Super Anti-bacterial: inhibits the activity of allergens (pollen, house-dust mites and their waste
products).
Testing authority: Osaka Municipal Technical Research Institute
Test method: Check the decrease of refined house dust mite allergen, by using enzyme immune measuring
method.
Inhibiting method: Contact with super allergy buster
Target: Allergy substances trapped by the filter (mites, pollen)
Testing result: More than 99% inhibition. Daikou research report No. 2127
The HEPA composite filter can give off unique and harmless smell of “Green Tea Catechin” ,
” Anti-bacterial Enzymes” and “Super Alleru-buster”.
※
3
The service life of the humidifying filter may vary with the water quality. In any one of the following
cases, please replace it immediately.
Generating environment
Small amount of ozone will be generated
After replacement, please fill in the date installed on the label and stick it on the back of the product.
Please dispose the used filter as non-inflammable garbage. Do not discard the filter frame and filter plate
When replacing the humidifying filter.
The water in the tank is not
reduced.
After maintaining it, its odor is still not
removed.
It is seriously damaged.
About nanoe
®
Conditions for generations
When nanoe
®
ion is generated, small amount of
ozone will be released. However, the quantity will
be like the usual lever in forest or natural
environment, and not harmful to human beings.
nanoe
®
is generated using the air in the room
and hence, depending on the temperature and
humidity, there can be incidences whereby
nanoe
®
is
not stably generated.
Sleep Mode Auto Operation
Detects the indoor brightness by the light sensor, and automatically adjusts the brightness of control
panel indicators and the front indication and the air volume.
Stop operation, then press and hold
and buttons at the same time.
(The air flow indicators light up in turn)
Release them when the required setting status
is reached.
(The default setting is “Sleep Mode Auto 1”when the product is used for the first time)
Sleep Mode Auto 1
Sleep Mode Auto 2
No Sleep Mode Auto
When the air volume is set to “Hi”, “Med” and “Lo”, the air volume is kept
unchanged.
The brightness of front indication in the
“Sleep Mode Auto Operation” can be changed.
Sleep Mode
Auto 1
Sleep Mode
Auto 2
No Sleep
Mode Auto
All on
All on
All on
All on
Half on
Half on
Half on
Off
Half on
Half on
All on
All on
Indoor brightness
control panel
control panel
control panel
Display
part
Dim
Dark
Front indication
Front indication
Front indication
Sleep Mode
Auto Setting
