試驗機構
：
一般財團法人紡檢品質評價機構
試驗方法
：
利用防霉試驗方法（暈圈法）進行確認
方法與場所
：
在水盤內安裝防霉組件
試驗結果
：
確認有抑制效果
。
防霉組件中有時會有粉末出現
，
並不影響使用
。
防霉劑伴隨使用會變小
，
並不影響防霉
。
防霉劑有其特殊的氣味
，
對人體無害
。
請勿在已拆下加濕過濾網的狀態下運行
。
（否則可能無法達到加濕效果）
請勿在已拆下防霉組件的狀態下運行
。
（否則可能無法達到防霉效果）
16
防霉組件
水盤
維護保養
提示事項
提示事項
Notice
水盤
<約每月
1
次
※
1
>
防霉組件
<約每月
1
次
※
1
>
長期不使用時
拆下防霉組件
進行水洗
在廚房用中性洗滌劑
進行浸泡清洗
。
用棉花棒及牙刷去除細微處的污漬
。
請勿取下浮子(發泡聚苯乙烯)
請把它放在加有廚房用
中性洗滌劑的溫水內浸
泡
30
分鐘左右
，
然後再
用清水沖洗
2
～
3
次
。
請勿使用刷子擦刷
、
以及請勿拆開
。
安裝時盡量保持水平
，
放入水盤的凹部
。
頑固污垢
→
使用在溫水或含有廚房用中性洗滌劑內浸
濕的柔軟抹布將污穢部分擦乾淨
。
拔出電源插頭
。
(因為停止運轉時也耗電
。)
請倒掉水箱和水盤中的水
，
全部進行維護保養
。
徹底擦乾內部
。(
否則因生銹可能導致產品發生故障
。)
加濕過濾網組件要在陰涼處晾乾
。(
防霉
)
蓋上塑膠袋
，
並存放於乾爽處
。(
倒置或平放可能會導
致產品發生故障
。)
MAINTENANCE
防霉組件的功能
利用防霉劑抗霉菌
Do not operate the product when the humidifying filter is removed. (The humidifying filter cannot function while it is removed.)
Do not operate the product when the anti-fungus assembly is removed. (The anti-fungus assembly cannot function while it is
removed.)
Disconnect the power plug. (The product still consumes
power even at rest.)
Please empty the tank and tray, and maintain them.
Dry their interiors completely. (Otherwise, the product may
be failed due to rust.)
Dry the humidifying filter assembly in a cool place. (Anti
-fungus)
Cover them with a poly bag, and keep them in a place
with little moisture. (If you keep them flat and then
overturn them, malfunction may be caused.)
About once a month
Tray
Wash it with water
Remove the anti-fungus assembly
Wipe away the hard stains with a soft cloth
moistened in warm water or water containing
neutral detergent for kitchen purpose.
Wipe the dirt with a swab, or use the toothbrush to
scrub it.
Do not remove the floater (expanded polystyrene)
Hard stains
Notice
About once a month
Anti-fungus
assembly
Tray
Anti-fungus assembly
Immerse it in kitchen-purpose
neutral detergent solution and
rinse it with water.
Please soak it in warm water
containing the neutral
detergent for kitchen purpose
about 30 minutes, then
wash it 2~3 times
with clean water.
Do not scrub it with a brush,
and do not disassemble it.
Please keep it level when
installing, and fit into the
concave part of the tray.
Function of the anti-fungus assembly
Inhibit the mold bacteria with the anti-fungus agent.
Testing authority: Boken Quality Evaluation Institute
Testing method:Verify the method to prevent mold
bacteria (Halo method)
Method and place:Install the anti-fungus assembly in
the tray.
Testing result: Verify the effectiveness of preventing
mold bacteria.
The anti-fungus assembly may have powder
sometimes. This is normal and not a problem
with use.
The anti-fungus agent will be small along with
the use. This is not a problem with the anti-fungus
performance.
The anti-fungus agent has its own special smell,
harmless.
