12
(
(
1
3
MAINTENANCE
Cleaning method
Composite and deodorizing filter (When the filter clean
indicator is on (about once a month))
Lens(top left and top right)
Dry cotton swab
Wipe the dirt off the lens with a dry cotton swab
Remove the cover of dirt sensor as shown below.
Wipe the lens with a dry cotton swab as shown below.
3
1
Wipe the lens periodically.
(The sensor may not function normally with
accumulation of moisture and smoke from cigarette.)
Do not insert a cotton swab in other parts.
Be sure to disconnect the power before cleaning.
You can use a light in order to see lens clearly.
Dirt sensor (about once every 3 months)
After cleaning, connect the power, press and simultaneously for about 3 seconds,
the filter clean indicator is off, and the reset is completed.
Never wash the filter with water.
The filter side is free of maintenance.
When vacuuming, do not apply too much pressure as the filter may be damaged.
Lay with newspapers,
etc. to prevent dust
from staining the floor
Removal method:
Rotate the filter hook 1 up and the filter hook 2 down.
Clean the black side (active carbon side) with a vacuum cleaner
The installation method can be found on page 11 to 12.
Brush nozzle or gap nozzle
Filter Hook 1
1
2
Filter side
(
Front (Active
carbon side)
Filter Hook 2
20
