6
SETTING AND OPERATING REQUIREMENTS
Area that can enhance the effectiveness!
Place the product low on the floor as a countermeasure against PM2.5.
Way to circulate air more effectively.
Since PM2.5 and dusts are likely to float in the air near the floor, it is
recommended to put the product on the flat floor in the room.
PM2.5
PM2.5
Place the product with its left, right and the top about 150 cm or more away from walls,
curtains, etc., otherwise it is difficult for pollutants to be sucked into the product.
150 cm
Do not set the product in the following places.
Where the product will be exposed directly to
sunlight, outlet of air conditioner or heat, etc.
(Otherwise, deformation, degeneration, discolor
or malfunction may be occurred.)
Near equipment such as TV and radio.
(Otherwise, visual disturbances or noises may
be caused.)
If the product is used in the same place
for a long period.
Using the product continuously at the same
location may result in dirty surrounding walls
or floor. You are recommended to move the
product away from where it is placed when
maintenance it
Do not place any objects on the product.
Do not put any obstacles at the inlet and
outlet of the product.
(Otherwise, an operation error or malfunction
may be caused.)
(Otherwise, it may affect product
performance.)
Do not use the same power socket with TV,
radio, etc.
(Otherwise, visual disturbances or noises may
be caused.)
In this case, insert the power plug into another
power socket.
