20
English
►
Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
Note
Do not throw away the foil frame.
Replacing the cleaning liquid
If the STATUS lamp glows for 5 seconds when the
SELECT button is pressed, the cleaning liquid needs to
be replaced.
•Even if the STATUS lamp does not light up, replace
the cleaning liquid after 6 months have passed.
1
Remove the AC adaptor and
remove the cleaning liquid unit�
(See page 13�)
2
Wash away the old cleaning
liquid�
•It can be drained as sewage.
1
3
Rinse the cleaning liquid unit�
•Pour water as illustrated while tilting the
cleaning liquid unit and shaking it gently.
•You can clean with the cleaning liquid
filter removed.
After washing, be sure to attach the
cleaning liquid filter.
4
Gently wipe off any beard
trimmings attached to the
inside of the cleaning tray
(
a
) with a cloth or tissue
paper dampened with water�
•Clean the corners and uneven
parts of the cleaning tray with a
cotton swab dampened with water.
5
Prepare the new cleaning liquid�
(See page 13�)
The symbol on the left means “Do not
wash the self‑cleaning recharger with
water”.
Notes
•The cleaning liquid will decrease every time it is used,
but do not add detergent and water except when
replacing the cleaning liquid.
Doing so may deteriorate the cleaning function.
•Do not wash the self‑cleaning recharger unit with water.
•Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or
discoloration of the parts.
Wipe with diluted soapy water.
►
When the water does not drain from the cleaning tray
•Do not tilt the self‑cleaning recharger to pour out
water. Doing so may cause the cleaning liquid in the
cleaning liquid unit to spill or cause the self‑cleaning
recharger to malfunction.
