Panasonic ER-GD20, Руководство по эксплуатации

Страница: 13 / 32

13
Engli
sh
3. Wipe off the water with a towel
and let it dry naturally.
• It will dry faster with the blade
removed.
4. Apply the oil to the blade after
drying. (See page 14.)
5. Attach the blade and the
protective cap to the main body.
• Be sure to place the protective
cap on the main body to
protect blade when storing.
ER-GD30
► With the brush
1. Remove the attachment and blade.
(See page 10 and this page.)
2. Clean the main body using the brush.
3. Clean the blade using the
brush.
• Keep pressing down the
cleaning lever (
c
) to raise
the moving blade (
d
) when
cleaning between the
stationary blade (
e
) and the
moving blade.
c
e
d
4. Apply the oil to the blade. (See page 14.)
5. Attach the blade and the protective cap to the main
body.
• Be sure to place the protective cap on the main
body to protect blade when storing.
Removing and mounting the blade
• Please check if the blade is deformed or damaged
before removing and mounting it.
►
Removing the blade
1. Hold the main body in front.
2. Push the metal part of the blade
to the left with the thumb’s belly.
• It is no problem when touch the
blade by fingers.
• Be careful not to let the blade fall.
►
Mounting the blade
Fit the mounting hook (
B
) into the blade mounting
(
A
) on the main body and then push in until you
hear a click.
A B
Click
PB017539 - ER-GD30 20������_(01GB)_04-04-19.indd 13 2019/4/4 10:52:45