background image

5

4

SETTING UP THE MASSAGE LOUNGER

BEFORE USING THE UNIT

GROUNDING INSTRUCTIONS

• The product must be grounded.  If it should malfunction, grounding provides the path of least resistance for

electric current to reduce the risk of electric shock.  

• This product is equipped with a cord having an equipment-grounding conductor and a grounding plug.  The plug

must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local
codes and ordinances.

DANGER

• Improper connection of the equipment-grounding conductor can result in a risk of electric shock.  Check with a

qualified electrician if you are in doubt as to whether the product is properly grounded.  Do not modify the plug
provided with the product even if it does not fit the outlet.  Have a proper outlet installed by a qualified electrician.  

• This product is for use on a nominal 120-volt circuit and has

a grounding plug that looks like the plug shown in Figure A.
Make sure that the product is connected to an outlet having
the same configuration as the plug.  No adaptor should be
used with this product.  

Ensure there is adequate space for reclining
• Do not use the massage lounger in direct sunlight

or in places where it will be exposed to high
temperatures, such as in front of a heater, etc., as
this can cause discoloration or hardening of the
synthetic leather.

• Place the unit on a mat to prevent floor damage.

Figure A

GROUNDING
PIN

GROUNDED 
OUTLET

After removing everything from the box, you should have the following

Where to Use the Unit

Massage Lounger

Accessories

Armrest 

Marks indicating left and right
can be found on the underside
of each armrest.

Control Panel Stand

Pillow

Front

Front

Back

Left

Right

Back

Attachment Screws (M6

#

10) – 5

Control Panel Stand – 3
Left Armrest – 1
Right Armrest – 1

Allen Key

At Least 16 in. (40 cm)

Mat

At Least 16 in. (40 cm)

CAUTION

• Do not use the unit in areas with high humidity,

such as the bathroom, etc. as this can lead to
electric shock or other accidents.

• Do not allow children to play on the unit.  Doing

so may lead to accidents or injury.

• Place the unit on a totally flat surface.

Failure to do so may result in the seat tipping over.

{

Содержание EP3203 - MASSAGE LOUNGER - MULTI-LANG


















Отзывы: