17
16
Changing the Degree of Fatigue During the Program
• After pressing the button corresponding to the area you want to change and making any changes, press
.
• You can change the program even during mid-program by following the procedures on Pages 15 and 16.
(1) Press
to select the area
you want to change.
(2) Press
to input the degree
of fatigue.
(3) Press
after you have
finished making the desired
changes.
Additional Information
The massage will be carried out in descending order from the greatest degree of fatigue.
• If the degree of fatigue selected is the same, the massage will be carried out in the
following order. Neck -> Shoulders -> Back -> Lower Back.
• If the degree of fatigue selected for any particular area is
, then no massage
will be carried out in that area and the massage heads may merely pass over that
area on the way to the next selected area.
• If the degree of fatigue selected for the Neck to the Lower Back is
, no upper
body massage will be carried out.
• If the degree of fatigue selected for the Legs is
, no air massage will be carried
out.
— 3rd
— 1st
— No Massage
— 2nd
— Constantly
Massaged
Degree of Fatigue Settings are NOT Massage Strength Settings
• The movement and duration of the massage is determined by the unit based on the degree of fatigue selected.
• Use the Strength buttons to adjust the strength of the massage.
• Please note that in the Self Program massage strength for the legs cannot be set to 0.
• The focus button cannot be used in Self Program mode.
4. Sit back in the seat as far as possible with your head on the pillow (back cushion,
backrest).
After pressing
the seat will automatically recline to the massage position and body searching will commence.
• You will feel a light tapping sensation on your shoulders. Always check the shoulder position and when necessary adjust it
manually.
After body searching has been completed the massage will begin.
• The air massage on the lower body will commence at the same time that body searching commences. (If the legs has not
been selected then the air massage will not commence.)
• You can freely adjust the angle of the backrest and legrest.
• Slide the legrest to adjust the position of your knees and calves. (See extending the legrest on Page 14.)
5. After the massage has been completed the unit will automatically stop.
After the designated program has been completed the unit will automatically stop. The usual program takes about 15
minutes.
• If you want to stop the massage during a program press
. Press
if you want to stop the massage immediately.
* After the program has been completed the voice navigation will provide information regarding user program functions and
will flash.
Self Program Example
“My shoulders and lower back are a bit sore today so I think I’ll focus on those areas.”
(1) I just want a light
massage on my
neck so I’ll set
this at 1.
(2) My shoulders are
really stiff so I’ll
set this at 5.
(3) My back’s fine so
I’ll set this at 0.
(4) My lower back
feels pretty stiff
so I’ll set this at 4.
(5) I just want a light
massage on my
legs so I’ll set this
at 1.
1
5
0
4
1
Press
Press
Press
Press
Press
Degree of Fatigue
