Safety precautions
WARNING
Plug and Cord
Disconnect the plug by holding onto it instead of pulling on the cord.
(Failure to do so may cause the wire in the cord to break, and may cause
burn, electric shock, or fire due to a short circuit.)
Regularly clean the plug to prevent dust from accumulating.
(Failure to do so may cause fire due to insulation failure caused by humidity.)
→
Disconnect the plug and wipe with a dry cloth.
Always turn OFF the power switch and disconnect the plug from the
household outlet after use.
(Failure to do so may cause fire or burn.)
Fully insert the plug.
Use the household outlet alone: do not use with an extension cord.
Always use with an 220 V
power supply.
(Failure to do so may cause fire or electric shock.)
When the appliance is used in a bathroom, unplug it after use since the
proximity of water presents a hazard even when the appliance is
switched off.
For additional protection, the installation of a residual current device
(RCD) having a rated residual operating current not exceeding 30 mA is
advisable in the electrical circuit supplying the bathroom.
→
Ask your installer for advice.
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent (described in the warranty), or similarly qualified
persons in order to avoid a hazard.
(Failure to do so may cause an accident or injury.)
EN4
Содержание EH-TNA9J
Страница 75: ...Memo ...
Страница 76: ...Panasonic Corporation Web site http www panasonic com Panasonic Corporation 2016 ...