Panasonic EH-TNA9J, Руководство по эксплуатации

Страница: 20 / 76

Troubleshooting
Problem Possible cause Action
Sparks can be seen
inside the appliance when
using [HOT].
These sparks are caused
by the thermostat switch,
the protective device, and
this is not dangerous.
Dust is attached to the
air inlet or air outlet.
Hair or something is
blocking the air inlet.
Remove the attached dust.
(P. EN17)
Hot air repeatedly turns
into cold air.
Do not block the air inlet.
The hot air is abnormally
hot.
The power plug is
abnormally hot.
The power plug is not
firmly inserted into the
outlet.
Use an outlet in which the
power plug fits snugly.
Sparks are generated
inside the nanoe™ outlet.
The needle‑shaped part
located at the back of the
nanoe™ outlet is dirty. Perform maintenance on
the nanoe™ outlet.
(P. EN18)
A noise (crackling) is
heard inside the nanoe™
outlet.
There is a peculiar smell.
This is because nanoe™ and mineral ion produce a
peculiar smell; there is no influence to your body.
Water droplets fly out
from the nanoe™ outlet.
Water droplets occasionally fly out from when
generating nanoe™; this is not an abnormality.
The [HOT] lamp is blinking
quickly (twice per second).
Device abnormality.
Please consult an
authorized service center
(described in the warranty).
Specifications
Power source
220 V 50 Hz
Power consumption 1 800 W (When using [HOT] [3])
EN20