Panasonic DVCPRO AJ-CA901P, Руководство по обслуживанию

Страница: 134 / 268

INS-4
1-3-4. Fixing Metal Plate
1. Fix Metal plate with Gold screw as shown Figure.
3-7.
Fig. 3-6
Fig. 3-7
1-3-5. Fixing Base plate
1. Fix Base plate and Battery plate with four-long
screws. (Do not pinch any cables between the Unit
and Base plate)
Fig. 3-8
1-3-6. Cable Connections part 2
1. Loosen 2 screws and then remove a Cover of 26-
pin adaptor.
2. Remove 2 Screws C and then remove BNC
terminal P.C.Board. (See Figure 3-9.)
Fig. 3-9
3. Pull out 4 wire harnesses for 26 pin adaptor and
then connect them to wire harness from Base
plate. (As shown Figure.3-10)
[Connectors]
i) 8-pin female
ii) 4-pin male
iii) 2-pin female
iv) 2-pin male
Fig. 3-10
4. Store Cables into the Unit and then assemble
“Cover of 26-pin adaptor”, “BNC Terminal P.C.B”
and “Side panel” to original position.
Metal plate
Fixed with
Gold screw
Screws C
Base plate
Battery plate