Panasonic DVCPRO AJ-CA901P, Руководство по обслуживанию

Страница: 138 / 268

INS-8
1-4-3. Version-up method for IC6006 (VTR_SYS P.C.Board)
Replace IC6006 on VTR_SYS P.C.Board to following version or higher.
Model Number Part Number
AJ-D910WAP VSI3537A (Ver. P2.02)
AJ-D910WAE VSI3538A (Ver. E2.02)
AJ-D610WAP VSI3540A (Ver. P2.02)
AJ-D610WAE VSI3541A (Ver. E2.02)
1-5. SW Settings
Set switches on ENC (Encoder) and SYNC P.C.Board as follows.
ENC P.C.B SW201 (26P) : ON
SYNC P.C.B SW1 (on the small P.C.B.) : OFF
NOTE: The AJ-CA900HP/EN uses signal lines for 26-pin camera output adapter (AJ-YA900P). Therefore, the AJ-
CA900HP/EN can not be used with the AJ-YA900P at the same time.
ON
ENC P.C.B.
(Component side)
SW201
OFF
SYNC P.C.B.
(Component side)
SW1
VTR_SYS P.C.B.
(Component side)
IC6006