Panasonic DP-MB350, Руководство по эксплуатации

Страница: 83 / 120

11. Help
83
For assistance, please contact an authorized Panasonic dealer.
“
Fax in Memory
”
L
The unit has a document in memory. See the other displayed message
instructions to print out the document. For fax memory capacity, see page
104.
L
If the PC fax setting (feature #442 on page 65) is set to “
Always
”,
– check the connection between the computer and the unit.
– check that the computer is turned ON.
L
If the fax preview mode (feature #448 on page 52) is set to “
On
”,
– view, print or save the received fax documents (page 48, 49, 52), and
then erase the unnecessary documents (page 49).
– turn the setting to “
Off
”. The fax documents stored in memory will be
printed automatically.
– set feature #449 (page 65) to “
On
”, and then print the received fax
documents (page 49).
“
File Size Over
”
L
When performing scan to FTP server, the total file size of scanned data
exceeded the file size limitation. Divide the document into sections.
“
Keep Copying
”
L
Copying has stopped due to some existing problem (Example: a lack of
recording paper or a recording paper jam). See the other displayed
message instructions to continue copying.
“
Left Cover Open
”
L
The left cover is open. Close it.
“
Low Temperature
”
L
The inside of the unit is extremely cold and cannot be operated. Use the unit
in a warmer area.
“
Memory Full
”
L
When performing memory transmission, the document being stored
exceeded the memory capacity of the unit. Send the entire document
manually.
L
When making a copy, the document being stored exceeded the memory
capacity of the unit. Press
{
Stop
}
to clear the message. Divide the
document into sections.
“
Memory Overflow
”
L
When printing a file, the document being stored exceeded the memory
capacity of the unit. Press
{
Stop
}
to clear the message. Change the printer
settings (page 28).
“
Modem Error
”
L
There is something wrong with the unit’s modem. Contact our service
personnel.
“
No Fax Reply
”
L
The other party’s fax machine is busy or has run out of recording paper. Try
again.
“
Out of Paper Input Tray
#1
”
L
Recording paper is not loaded or the paper input tray has run out of paper.
Load paper (page 14).
L
Recording paper was not fed into the unit properly. Load the paper again
(page 14).
Note:
L
“
#1
”: Standard input tray
L
“
#2
”: Lower input tray
L
“
#1+#2
”: Standard input tray and lower input tray
“
Paper Jammed
”
L
A recording paper jam occurred. See the other displayed message
instructions to remove the jammed paper (page 94).
“
PC Fail or Busy.
”
L
The cable or the computer power cord is not connected correctly. Check the
connections (page 17, 25).
L
The software is not running on the computer. Restart the software and try
again.
“
Please Wait
”
L
The unit is warming up. Wait for a while.
Display Cause & Solution