Panasonic DP-MB350, Руководство по эксплуатации

Страница: 60 / 120

9. Programmable Features
60
Setting the recording paper
type
{#}{
3
}{
8
}{
3
}
{
1
}
“
Plain Paper
” (default): 75 g/m
2
to 90 g/m
2
(20 lb to 24 lb) paper.
{
2
}
“
Thin Paper
”: 64 g/m
2
to 75 g/m
2
(17 lb to 20 lb) paper.
{
3
}
“
Thick Paper
”: 90 g/m
2
to 165 g/m
2
(24 lb to 44 lb) paper.
Note:
L
This setting is valid for both the standard input tray and the lower input tray.
L
“
Thick Paper
” will not be displayed if any of the paper input tray settings
are changed to “
#2
” or “
#1+#2
”:
– fax (feature #440 on page 64).
– copy (feature #460 on page 67).
– PCL
®
(feature #760 on page 69).
– scan to email print feature (feature #565 on page 74).
Setting the paper input tray to
use for lists and reports
printing
{#}{
3
}{
9
}{
0
}
This feature will be displayed only when the lower input tray is installed (page
79).
{
1
}
“
#1
” (default): Standard input tray
{
2
}
“
#2
”: Lower input tray
{
3
}
“
#1+#2
”
Note:
L
To select “
#2
”, select “
Plain Paper
” or “
Thin Paper
” for the recording
paper type setting (feature #383 on page 60).
L
To select “
#1+#2
”,
– select the same paper size for the standard input tray (feature #380 on
page 59) and lower input tray (feature #382 on page 59). If either is
changed, “
#1
” will be selected automatically.
– select “
Plain Paper
” or “
Thin Paper
” for the recording paper type
setting (feature #383 on page 60).
Setting the waiting time for
the power save mode
{#}{
4
}{
0
}{
3
}
To set the length of time before the unit enters power save mode.
{
1
}
“
5min
”: 5 minutes
{
2
}
“
15min
” (default): 15 minutes
{
3
}
“
30min
”: 30 minutes
{
4
}
“
1h
”: 1 hour
Note:
L
When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
Holding the previous contrast
setting
{#}{ 4 }{ 6 }{ 2 }
{
0
}
“
Disabled
” (default): Deactivates this feature.
{
1
}
“
Enabled
”: The unit will hold the previous setting.
Note:
L
The previous setting will be held individually for copying and sending faxes.
Setting the default operation
mode
{#}{
4
}{
6
}{
3
}
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{
1
}
“
Copy
” (default): Copy mode is selected as default.
{
2
}
“
Fax
”: Fax mode is selected as default.
Note:
L
You cannot select the scan mode using this feature.
Setting the default operation
mode timer
{#}{
4
}{
6
}{
4
}
To set the timer before returning to the default operation mode (feature #463).
{
0
}
“
Off
”: Deactivates this feature.
{
1
}
“
30s
”: 30 seconds
{
2
}
“
1min
” (default): 1 minute
{
3
}
“
2min
”: 2 minutes
{
4
}
“
5min
”: 5 minutes
Feature/Code Selection