8
■
The copier should not be installed in areas with the
following conditions:
C
Extremely high or low temperature and humidity.
Ambient conditions
Temperature:
50°F – 95°F (10°C – 35°C)
Relative humidity: 45% – 85%
C
Where temperature and humidity can change
rapidly, causing condensation.
C
Direct exposure to sunlight.
C
Directly in the air conditioning flow.
C
In areas of high dust concentration.
C
In areas of poor ventilation.
C
In areas with chemical fume concentration.
C
In areas with extreme vibration.
C
With unstable or uneven conditions (floors, etc.).
■
The maximum power consumption is 1.5 kW.
A properly wired (grounded), dedicated, 15A, 120V AC outlet is required. Do not use an extension
cord.
The main plug on this equipment must be used to disconnect the main power. Please ensure that
the socket outlet is installed near the equipment and is easily accessible.
FCC WARNING For U.S.A.
FCC WARNING:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his/her own expense.
The user could lose the authority to operate this equipment if any unauthorized changes or
modifications are made to this equipment.
Installation
Precautions