Recording
TQBS0165
19
Timer recording
You can enter up to 32 programmes within a
month in advance. (Each daily, weekly or series
programme is counted as one programme.)
This unit can record two programmes being
broadcasted at the same time.
In addition, depending on the programme you
have missed to watch or record, you may be able
to catch up on it later. (
>
15)
• You can set the start and finish time to make the timer
recording work successfully. (
>
54, Timer Record Start
Buffer, Timer Record Stop Buffer)
• Timer recordings set for two consecutive programmes will
be treated as simultaneous timer recordings set for two
programmes. If you set a timer recording for an additional
channel, the Overlapped Timer Recording screen may be
displayed. After selecting “Keep” to close the Overlapped
Timer Recording screen, adjust the recording start and end
times on the Timer Recording screen. (
>
20, Manual timer
recording)
• Some broadcasters may not send programme information
correctly. In such cases, use manual timer recording.
(
>
20)
To use TV Guide system (
>
15)
Operation during Recording (
>
18)
To edit the timer programme (
>
21)
Select “Single Timer Rec.” or “Series Timer Rec.”
(
>
20), then press [OK].
• The overlapped programmes are displayed
with
if their repeat programmes (the
same programmes broadcast at different
times) are available for timer recording.
1
Press [GUIDE].
TV Guide screen appears.
2
Select the programme, then press the
red button.
The timer icon “
F
” (red) is displayed.
• If on-screen instructions are displayed,
follow them.
If the screen for selecting single or series
timer recording appears
To edit the timer recording on the TV Guide
screen
1 Select the programme to edit, then press the
red button.
2 Select “Timer Rec Edit”, then press [OK].
3 Go to step 3 on page 20, “Manual timer
recording”.
To cancel a timer recording on the TV Guide
screen
1 Select the programme to cancel, then press
the red button.
2 Select “Timer Rec Cancel”, then press [OK].
(“
F
” disappears.)
If “Overlapped Timer Recording” screen
appears
You can eliminate the overlapping or may change
with repeat event for the duplicated programme.
1 Select “Change”, then press [OK].
2 Follow the on-screen instructions.
Red:
Delete programme
Green:
Record repeat programme
Yellow: Exit (Overlapping is not resolved)
Timer programme overlaps with others.
Some part or all of programmes may not be recorded completely.
Overlapped Timer Recording
Keep
Change
Please delete unnecessary programme to resolve.
OK
RETURN
Overlapped Timer Recording
New Programme
Confirm
Delete
Repeat
THU 11.10
XXXX - XXXX
TWO Wales
Existing Programmes
THU 11.10
Holiday
THU 11.10
Animals
Episode 01/ 02
R
XXXX - XXXX
XXXX - XXXX
R
DMR-HST270GZ_eng.book 19 ページ ２０１７年１２月２６日 火曜日 午後５時４７分
