Advanced Operations
60
You can transfer (dubbing) programs recorded on a disc
°
onto a tape
with one stroke of the button.
In One-Touch Dubbing, all contents on the disc are automatically
dubbed onto the tapes.
°
Available discs for transfer (dubbing) onto tape are DVD-RAM and
non-finalized DVD-R. Most DVD videos cannot be dubbed
because they are copy-guarded.
Preparation
≥
Select the unit viewing channel (or the AV input) on the TV.
DVD
≥
Insert the disc containing the program to be copied (
l
20).
VHS
≥
Insert a video cassette with an intact erasure prevention tab.
(
l
48)
≥
Confirm that the remaining tape time is sufficient for recording.
(
l
57)
≥
Select the recording mode.
[1]
While both DVD/VHS are stopped,
Press and hold [VHS
—
, DUBBING] for 3 seconds
or more.
On the main unit, press [VHS
—
].
≥
Check if transfer (dubbing) starts properly.
≥
The [DUBBING] indicator on the main unit lights.
≥
Dubbing is automatically completed when playback of the disc
is finished or the tape reaches its end.
∫
To stop transfer (dubbing) halfway through
Press [
∫
, STOP].
≥
When transfer (dubbing) is completed, a message indicating the
end of transfer (dubbing) appears on the TV screen and then
disappears a few seconds later.
∫
When transfer (dubbing) is started, the following
operations also start automatically:
≥
“Status Messages” on Display
)
“Off” (
l
45)
≥
Recording channel indication on VHS
)
“DC”
≥
Output to TV
)
VHS output
≥
Audio output when playing back DVD
)
Stereo (L R)
[RAM]
∫
Only the following operations are allowed while
transfer (dubbing):
≥
Stopping transfer (dubbing) by pressing [
∫
, STOP].
Note:
≥
While One Touch Transfer (Dubbing) is activated, timer recording
cannot be started.
≥
When “DVD/VHS Output” is set to “Manual” (
l
43), or when DVD
output is selected in starting transfer (dubbing), the output is
switched to VHS automatically at the time when transfer (dubbing)
is started.
- When the transfer (dubbing) is already started, you cannot switch
the output manually.
≥
When the transfer (dubbing) is not started or not executed, the
“DUBBING” indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
≥
If you start transfer (dubbing) when “PB” is blinking on the unit’s
display, the DVD is dubbed from the beginning of the title which
you stopped.
Transfer (Dubbing) from DVD
PROG/CHECK
DVD REC
VHS REC REC MODE
ADD/DLT
DUBBING
VHS
DVD
TIME SLIP
CHAPTER
JET REW
STATUS
DISPLAY
DVD ERASE
VHS
DVD
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
POWER
FUNCTIONS
DIRECT NAVIGATOR
TOP MENU
VHS MENU
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
VCR Plus+
OUTPUT
REC MODE
1
;
∫
CH,
W
,
X
µ
, VHS REC
VHS
—
:
,
9
OPEN/CLOSE
TIME SLIP
REC
CH
/
k
1.3
DUBBING
VHS
DVD
DUBBING indicator
∫
One Touch Transfer (Dubbing) (DVD
l
VHS)
∫
About Recording VISS
(
l
55)
In One-Touch Dubbing from DVD to VHS, the index signal is
automatically recorded for each title. You can search desired
titles with [
:
] or [
9
].
VHS
DVD
PP-Sample.book 60 ページ ２００４年４月８日 木曜日 午後３時４５分
