Co
nveni
e
nt
f
unct
ions
VQT3C14
92
Software (Firmware) Update
Software of this unit can be updated automatically by the
following methods at the specified time.
(Default setting is 3 a.m.
>
90, Software Update in Standby)
– From broadcasts
– From Internet
§
≥
To update the Software (Firmware) immediately, use
the following function:
– Software Update Now ( Broadcast ) (
>
90)
Software of this unit will be updated from broadcasts if
update information is detected.
– Software Update Now ( Internet )
§
(
>
90)
Software of this unit will be updated from Internet if
update information is detected.
§
Network connection and setting are required. (
>
14,
21)
∫
If a software (firmware) update is
available, a notification is displayed.
≥
It is displayed on the channel information (
>
25) when
the Software (Firmware) can be updated immediately.
To execute, push the “Red” button while the channel
information is displayed, and follow the instructions on
the screen.
≥
Update of the software (firmware) will start when the unit is
turned to standby mode.
∫
The unit’s display during the update
e.g.,
≥
When “FINISH” is displayed, update of the software
(firmware) has completed.
≥
The time it takes to update depends on the connection.
– From broadcast: About 2 hours
– From Internet: About 1 hour
≥
The download time depends on the network or broadcast environment.
≥
If the timer recording is scheduled within the following time at the start of
the download, the download will not be executed.
– From broadcast: Within 4 hours
– From Internet: Within 1 hour
≥
You can also download the latest software (firmware) from the following
website and burn it to a CD-R to update the software (firmware).
http://panasonic.jp/support/global/cs/
≥
If you do not want to perform the software (firmware) update, set the
“Software Update in Standby” to “Off”. (
>
90)
New software version has been found.
The software will be updated automatically
after this unit is switched to standby.
Do not disconnect the AC mains lead.
1
All Digital Channels
10:30 AM
NEWS
9:00 AM - 11:00 AM
Now
Dolby D
Rating: G
Select favourites
Software update
e.g.,
You cannot operate the unit until the update is
complete. Removing the AC mains lead while the
update is in progress may damage the unit. Don’t
remove the AC mains lead during the update.
DMRBWT800&700GL_eng.book 92 ページ 2011年2月14日 月曜日 午後3時50分