G
et
ti
n
g
st
art
e
d
VQT3C14
13
Required setting:
Set “HDMI Audio Output” to “On” (
>
86).
(The default setting is “On”.)
≥
The HDMI connection supports VIERA Link “HDAVI Control” (
>
72).
[BWT800]
(VIERA Link “HDAVI Control” can only be used on the
connection from the HDMI (MAIN) terminal.)
About HDMI cable
≥
Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover).
≥
When outputting 1080p signal, please use HDMI Cables
5.0 meters or less.
≥
Recommended Panasonic HDMI cable part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50
(5.0 m), etc.
≥
You cannot connect this unit to DVI devices that are incompatible with
HDCP.
Depending on the device, images may not display properly or at all when
connecting with a DVI/HDMI switching cable. (Audio cannot be output.)
≥
If you are connecting to a TV that is only compatible with 2 channel
audio output, audio with 3 channels or more will be down mixed (
>
115)
and output as 2 channels, even if connecting with an HDMI cable.
(Some discs cannot be down mixed.)
≥
Connect to terminals of the same colour.
§
If the unit is connected to the TV with the supplied
Audio/Video cable (
>
15), the optional one is required.
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket.
This unit consumes a small amount of power, even when it
is turned off
[approx. 0.2 W (“Power Save in Standby” is activated
and “RF OUT ( Aerial Signal )” is set to “Off”)]
Connect the Set Top Box or video
equipment
∫
Connecting with
AUDIO/VIDEO terminals
∫
Connecting with AUDIO
and S VIDEO terminals
AV
O
U
T
A
V IN
R - AUDIO- L
VIDEO
S VIDEO
SUB
AV
O
U
T
A
V IN
R - AUDIO- L
VIDEO
S VIDEO
AUDIO OUT VIDEO OUT
R
L
AUDIO OUT
S VIDEO OUT
R
L
This unit’s rear panel
Set Top Box, etc.
S Video cable
Audio/Video cable
(supplied)
§
This unit’s rear panel
DMRBWT800&700GL_eng.book 13 ページ 2011年2月14日 月曜日 午後3時50分