Getting started
VQT5D92
13
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
Main unit
1
Standby/on switch (
Í
/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2
Open/close disc tray
3
Disc tray
4
USB port
5
SD card slot
• When removing the SD card, press on the
centre of the card and pull it straight out.
Pull to flip down the
front panel.
SD card
USB memory
Disc
6
Recording indicator
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
7
Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
8
Stop
9
Start play
:
CI (Common Interface) slot (
>
14)
;
CI module eject button (
>
14)
Display
1 Drive (HDD, BD or SD) indicator
2 Disc indicator
3 Copying indicator
4 USB port indicator
5 SD card slot indicator
6 Timer recording indicator
• This indicator lights up when the timer
recording standby is activated.
7 Remote control signal indicator
8 Main display section indicator
- Current time
- Playback counter
- Various messages (
>
113)
9 Playback indicator
Display
PLAY
COPY
SD
USB
HDD
SD
BD
1
2
5
6 7
4
3
8
9
DMR-BCT83_73EN_eng.book 13 ページ 2013年7月18日 木曜日 午前10時28分