40
VQT2J83
Dynamic Range Compression
[BD-V]
[AVCHD]
[DVD-V]
[DivX]
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥
“Auto” is effective only when playing Dolby TrueHD.
Digital Audio Output
Press [OK] to show the following settings.
≥
For details on digital output (
>
45)
Downmix
Switch the downmix system for playing back multi-channel
surround sound.
≥
When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD”
is set to “Bitstream”, there are no downmix effects for the
outputted audio.
≥
The audio will be output in “Stereo” in the following cases:
j
AVCHD playback
j
Playback of secondary audio (including the button click
sound)
On-Screen Messages
Choose whether to show status messages automatically.
Choose the language for these menus and on-screen
messages.
* Only for the United Kingdom, Republic of Ireland and
Continental Europe.
Screen Saver Function
Software Licence
Information about the software used by this unit is displayed.
Sound
!
On
!
Off
!
Auto
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select whether Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS Digital Surround, DTS-HD High Resolution
Audio or DTS-HD Master Audio is output in “Bitstream” or
“PCM” format.
≥
Not making the proper settings may result in noise.
≥
If the unit is connected with the HDMI AV OUT terminal,
the specifications of the connected equipment take
precedence over this unit and audio selected in these
items may not be output (e.g., when a television is
connected, the HDMI audio output of this unit is limited to
down-mixed 2ch.)
!
Bitstream:
Select “Bitstream” when the connected equipment can
decode the respective audio format.
j
Connect equipment supporting HDMI (High Bit rate
Audio) and use a High Speed HDMI Cable in order to
output high bit rate audio such as Dolby Digital Plus,
Dolby TrueHD, DTS-HD High Resolution Audio or
DTS-HD Master Audio.
!
PCM:
Select “PCM” when the connected equipment cannot
decode the respective audio format.
Refer to the operating instructions for connected devices to
verify whether or not they can decode each of the audio
formats.
MPEG Audio
!
Bitstream:
When connected to equipment with a built-in MPEG
decoder.
!
PCM:
When connected to equipment without a built-in MPEG
decoder.
BD-Video Secondary Audio
[BD-V]
Turn on/off the clicking sound on the menu and audio with
secondary video in picture-in-picture mode. (
>
18)
!
On:
The primary audio and secondary audio are mixed and
output. The sampling frequency is converted to 48 kHz.
!
Off:
The button click sound on the menu and secondary
audio are not output.
!
Stereo:
When connected to equipment that does not support the
virtual surround function.
!
Surround encoded:
When connected to equipment that supports the virtual
surround function (to convert 2-channel to multi channel
surround).
Display
!
Automatic
!
Off
On-Screen Language*
For United Kingdom and Republic of Ireland:
!
English
!
Français
!
Español
!
Deutsch
!
Italiano
!
Nederlands
For Continental Europe:
!
English
!
Français
!
Español
!
Deutsch
!
Italiano
!
Nederlands
!
Svenska
!
On:
j
If there is no operation for 10 minutes or more, DIRECT
NAVIGATOR screen switches to FUNCTION MENU
screen automatically.
j
While playing and pausing, etc., this function is not
available.
j
While playing music (CD-DA or MP3), after about
2 minutes DIRECT NAVIGATOR screen switches to a
blank screen with “Screen Saver” message.
j
When playing the 4:3 image, the masked-off area on the
screen become black.
[Only when connecting with an HDMI cable, “TV Aspect”
(
>
41) is set to “16:9” and “HDMI Video Format”
(
>
41) is set to any mode other than “576p/480p”.]
j
This will not operate during Photo Frame playback
(
>
20)
!
Off
DMPB500EB-VQT2J83_eng.book 40 ページ ２０１０年３月３０日 火曜日 午後３時４２分
