3
VQT3A95
En
gli
sh
Safety precautions
Unit
≥
To reduce the risk of fire, electric shock or product
damage,
– Do not expose this unit to rain, moisture, dripping or
splashing.
– Do not place objects filled with liquids, such as vases,
on this unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
– Do not let metal objects fall inside this unit.
– Do not place heavy items on this unit.
AC mains lead
≥
To reduce the risk of fire, electric shock or product
damage,
– Ensure that the power supply voltage corresponds to the
voltage printed on this unit.
– Insert the mains plug fully into the socket outlet.
– Do not pull, bend, or place heavy items on the lead.
– Do not handle the plug with wet hands.
– Hold onto the mains plug body when disconnecting the
plug.
– Do not use a damaged mains plug or socket outlet.
≥
Install this unit so that the AC mains lead can be
unplugged from the socket outlet immediately if any
problem occurs.
Unit
≥
This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
≥
Do not place sources of naked flames, such as lighted
candles, on this unit.
≥
This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile
telephone.
≥
This unit is intended for use in moderate climates.
Placement
≥
Place this unit on an even surface.
≥
To reduce the risk of fire, electric shock or product
damage,
– Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space. Ensure this unit is
well ventilated.
– Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
– Do not expose this unit to direct sunlight, high
temperatures, high humidity, and excessive vibration.
Batteries
≥
Danger of explosion if battery is incorrectly replaced.
Replace only with the type recommended by the
manufacturer.
≥
Mishandling of batteries can cause electrolyte leakage
and may cause a fire.
– Do not mix old and new batteries or different types at the
same time.
– Do not heat or expose to flame.
– Do not leave the battery(ies) in a car exposed to direct
sunlight for a long period of time with doors and
windows closed.
– Do not take apart or short circuit.
– Do not recharge alkaline or manganese batteries.
– Do not use batteries if the covering has been peeled off.
– Remove batteries if you do not intend to use the remote
control for a long period of time. Store in a cool, dark
place.
≥
When disposing the batteries, please contact your local
authorities or dealer and ask for the correct method of
disposal.
Accessories
Check the supplied accessories before using this unit.
≥
Product numbers provided in these operating instructions correct as of
January 2011. These may be subject to change.
≥
Do not use AC mains lead with other equipment.
Insert so the poles (
i
and
j
) match those in the remote
control.
Point it at remote control signal sensor on this unit.
WARNING
CAUTION
1
Remote control
(N2QAYB000577)
2
Batteries for remote control
1
AC mains lead
1
CD-ROM
Using the remote control
R6/LR6, AA
(Alkaline or
manganese batteries)
(3)
DMP-BD75EG-VQT3A95.book 3 ページ ２０１１年１月１２日 水曜日 午前１１時１５分
