Advanced (Recording pictures)
- 70 -
∫
Shutter speed for each flash setting
¢
1 It may vary depending on the [MIN. SHTR SPEED] setting
(P137)
.
•
Refer to
P82
for details about the Aperture-Priority AE, Shutter-Priority AE, and Manual
Exposure.
•
In Intelligent Auto Mode, shutter speed changes depending on the identified scene.
•
In Advanced Scene Mode
(P86)
and Scene Mode
(P91)
, the shutter speeds will differ from
those described above.
Note
•
Do not bring the flash too close to objects or close the flash while it is activated. The
objects may be discolored by its heat or lighting.
•
Do not close the flash soon after the flash is activated prior to taking pictures due to AUTO/
Red-Eye Reduction etc. It causes a malfunction.
•
When you take a picture beyond the available flash range, the exposure may not be adjusted
properly and the picture may become bright or dark.
•
When the flash is being charged, the flash icon blinks red, and you cannot take a picture even
when you press the shutter button fully.
•
The White Balance may not be properly adjusted if the flash level is insufficient for the subject.
•
The flash effect may not be sufficient when using [FLASH BURST]
(P97)
in Scene Mode or
when shutter speed is fast.
•
When taking a picture with the flash, we recommend removing the lens hood. In some
cases it may not allow the scene to be illuminated properly.
•
It may take time to charge the flash if you repeat taking a picture. Take a picture after the
access indication disappears.
•
The Red-Eye Reduction effect differs between people. Also, if the subject was far away from
the camera or was not looking at the first flash, the effect may not be evident.
•
Flash is fixed to [
Œ
] when the [CONVERSION]
(P144)
is set to [
] or [
].
Flash setting
Shutter speed (Sec.)
Flash setting
Shutter speed (Sec.)
‡
1/60
¢
1
to 1/2000th
1
¢
1
to 1/2000th
‰
Œ
C
