394
SQW0566
Others
Q&A Troubleshooting
I cannot display or delete the images uploaded to the WEB service by this unit.
•The images uploaded to the WEB service cannot be displayed or deleted by this unit.
→ Perform the task using a smartphone or a PC.
Your “LUMIX CLUB” login ID and password were deleted after sending the camera in to be
repaired.
•The settings stored in the camera may be deleted depending on the type of repair.
→ Always make a copy of important settings.
Transmission of the image fails midway. There is an image that could not be transmitted.
•Image cannot be transmitted when the battery indicator is flashing red.
•Is the size of the image too large?
→ Divide the motion picture using [Video Divide]
(→292)
.
→ Reduce the image size at [Size]
, and then send.
•File format of the picture that can be sent differs depending on the destination.
(→319)
•Capacity or number of images in the WEB service is full.
→ Login to “LUMIX CLUB”, and check the status of the destination on the WEB service link
settings.
I have forgotten the password for the Wi-Fi.
→ Execute the [Reset Wi-Fi Settings] in the [Setup] menu.
However, the information you have set on the [Wi-Fi Setup] will be reset.
I cannot send images to an AV device.
•Sending may fail depending on the operational status of the AV device. Also, sending may take a
while.