207
SQW0566
Shutter and Drive Settings
Recording while exposure is changed automatically [Auto Bracket]
■
TZ110/ZS110
Changing the Single/Burst setting, compensation range, and recording
sequence of Auto Bracket
Set the menu
→ [Rec] → [Auto Bracket]
Press to select [Single/Burst Settings], [Step] or [Sequence] and press
[MENU/SET]
Press to select the setting and press [MENU/SET]
[Single/Burst
Settings]
(single)
(burst)
[Step]
3·1/3
(3 pictures)
3·2/3
(3 pictures)
3·1
(3 pictures)
5·1/3
(5 pictures)
5·2/3
(5 pictures)
5·1
(5 pictures)
7·1/3
(7 pictures)
7·2/3
(7 pictures)
7·1
(7 pictures)
[Sequence]
0/–/+
–/0/+
●
When you take pictures using Auto Bracket after performing Exposure Compensation, the camera
will take pictures using the corrected exposure value as a reference.
●
This function is not available in the following cases:
•[Glistening Water], [Glittering Illuminations], [Handheld Night Shot], [Soft Image of a Flower]
(Scene Guide Mode)
•[Rough Monochrome], [Silky Monochrome], [Miniature Effect], [Soft Focus], [Star Filter],
[Sunshine] (Creative Control Mode)
•When recording using [Post Focus]
•During motion picture recording
•When recording using the flash
•
TZ110/ZS110
During T (Time) recording
•
TZ110/ZS110
When [Multi Exp.] is set
•When using [Time Lapse Shot]
•When [Auto Shooting] of [Stop Motion Animation] is set to [ON]