73
VQT1S88
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P18.
Using one of these modes, jitter during picture taking is detected, and the camera
automatically compensates the jitter, enabling jitter-free images to be taken.
Applicable modes:
³²¿n
Note
•
The stabilizer function may not be effective in the following cases.
–
When there is a lot of jitter.
–
When the zoom magnification is high.
–
In digital zoom range.
–
When taking pictures while following a moving subject.
–
When the shutter speed becomes slower to take pictures indoors or in dark places.
•
Be careful of camera jitter when you press the shutter button.
•
The setting is fixed to [MODE2] with [SELF PORTRAIT] in scene mode and to [OFF] in
[STARRY SKY] in scene mode.
•
In motion picture mode, [AUTO] or [MODE2] cannot be set.
For details on [REC] mode menu settings, refer to P18.
You can take a picture brightly in dark places by setting [MIN. SHTR SPEED] slower. Also,
you can set it faster to reduce the blur of the subject.
Applicable modes:
³
[1/125], [1/60], [1/30], [1/15], [1/8], [1/4], [1/2], [1]
Note
•
This should usually be set to [1/8 ] to take pictures. (When you select a minimum shutter speed
other than [1/8 ], [
] appears on the screen.)
•
Setting [MIN. SHTR SPEED] to slower speed might increase the chance of jitter, so we
recommend using a tripod and the self-timer for taking pictures.
•
Setting [MIN. SHTR SPEED] to faster speed might make the picture darker, so we recommend
recording the picture in well-lit area. If correct exposure cannot be achieved, [
] will flash in
red when the shutter button is pressed halfway.
[STABILIZER]
[OFF]
[AUTO]
:
The optimum jitter compensation is selected depending on the condition.
[MODE1]
:
Jitter is always compensated during [REC] mode.
[MODE2]
:
The jitter is compensated for when the shutter button is pressed.
[MIN. SHTR SPEED]
Minimum shutter speed setting
1/125–
1 –
Brightness
Darker
Brighter
Jitter
Less
More
DMCFX150-VQT1S88_mst.book 73 ページ ２００８年７月９日 水曜日 午後８時１８分
