26
8.3.7.
Removal of the Main P.C.B. and
Speaker
(Fig. D10)
[ When Installing ]
CATION: Before soldering the Terminal A (Connecting part
of Main P.C.B. and Frame Unit).
Before soldering the Terminal A, make sure to tighten the
“Screw (G)” first in order to eliminate the gap between Main
P.C.B. and Frame Unit. Otherwise, soldered terminal A part
may be damaged after assembling.
8.3.8.
Removal of the Battery Door Unit
(Fig. D11)
NOTE: (When Installing)
Make sure to confirm the following points when installing:
• The Screw is tightened enough.
• Installing conditions are fine. (No distortion, no abnormal-
space.)
• No dust and/or dirt on Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)
Содержание DMC-FH10P
