57
RQT8849
Connection and Setting
Perform steps 1–5 of “Clock Settings”.
Set Clock Automatically
,
to select “Set Clock
Automatically”, then
ENTER
ENTER
to start auto setting.
The following screen appears when the setting
is complete.
Set Clock Automatically
Clock Setting completed successfully.
4/4/2007 11:15 AM
DST----------- On
Time Zone---- EST
ENTER
,
to select “Other Functions”,
then
ENTER
,
to select “Setup”,
then
ENTER
,
to select “Setup”,
then
.
,
to select “Clock Settings”,
then
ENTER
Clock Settings
W
ith the unit stopped
Notes
This may take some time, up to a few hours in some cases.
If the following message appears
Setup
Setup
Audio
Display
TV Screen
VHS
Channel
Disc
Video
No
Yes
ENTER
Set Clock Automatically
12/14/2007 5:28 AM
DST----------- Off
Time Zone---- EST
Setting completed as follows.
Finish the setup with this clock time?
Note:Selecting“No”will start channel scanning
again and renew the clock time.
If the time is correct, press [
] to select “Yes”, then press [ENTER].
–
If you select “No”, auto setting starts again, then the above
screen reappears. Repeat this step until the correct time appears.
If the clock is not correct, set the clock with “Adjust Time Zone”
(
below) or “Set Clock Manually” (
40).
Tips
To cancel in the middle
Press [RETURN]. The unit then displays “Set Clock Manually”
screen (
54, Manual Clock Setting).
Time Zone
Time Zone shows the time difference from Greenwich Mean Time
(GMT).
EST (Eastern Standard Time)
GMT
5
CST (Central Standard Time)
GMT
6
MST (Mountain Standard Time)
GMT
7
PST (Pacifi c Standard Time)
GMT
8
AST (Alaska Standard Time)
GMT
9
HST (Hawaii Standard Time)
GMT
10
For other areas: xx hr
DST (Daylight Saving Time)
If you select “On”, the clock is advanced one hour starting at
2 a.m. on the second Sunday in March and ending at 2 a.m. on the
fi rst Sunday in November.
Set the DST period manually when it varies according to regions
(
54).
Adjust Time Zone
Adjust the time zone (
1 or 1) if it was not set correctly
with auto clock setting.
You can set this menu only after “Set Clock
Automatically” is completed.
Perform steps 1–5 of “Clock Settings”.
,
to select “Adjust Time
Zone”, then
ENTER
,
to select “
1” or “1”
then
ENTER
Adjust Time Zone
0
Tips
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
ENTER
to complete.
M5821.indb 57
M5821.indb 57
2007/05/23 15:13:04
2007/05/23 15:13:04