54
RQT8849
The types of transmission:
,
to select “Antenna” or
“Cable”,
then
ENTER
Automatic Clock and Channel Settings
Please select the wire connected to RF IN.
Cable
Antenna
ENTER
Confi rm the time, then
ENTER
– DST (Daylight Saving Time) shows the
summertime setting.
– Time Zone shows the time difference from
Greenwich Mean Time (GMT).
See “Notes”
(
right)
Set Clock Automatically
Clock Setting completed successfully.
4/4/2007 11:15 AM
DST----------- On
Time Zone---- EST
ENTER
Tips
If the unit displays “
No channels were found.
”, turn off the unit
and confi rm the cable or antenna input is connected to the RF IN
terminal. Restart the set up again (
below).
If “
Auto Clock Setting is incomplete.
” is displayed, press
[ENTER] and set the clock manually (
right).
If the clock is not correct, set the clock with “Adjust Time Zone” or
“Set Clock Manually” (
40).
You can delete channels you don’t need after completing Auto
Channel Setting (
55).
Restarting the Auto-Setup
(after relocation, for example)
1.
W
hen the unit is on and stopped, press and hold [CH
] and
[CH
] on the main unit at the same time for about 5 seconds.
The unit turns off.
2. Press [
DVD/VHS PO
W
ER] to turn the unit on.
(The signal source and channel captions revert to their default
values. All scheduled recordings are cleared.)
To cancel in the middle
Press [RETURN].
Manual Clock Setting
Perform steps 1–6 on page 53.
,
to select the item you want
to change.
Set Clock Manually
/
:
/
SAT
AM
Month
Day
Year
Hour
Minute
1
1
12
00
2000
DST
Time Zone
Off
EST
ENTER
,
to change the setting.
– Repeat steps 7–8 to change other items.
ENTER
to confi rm new date and
time and to initiate the clock.
Notes
The automatic clock setting can take a few minutes.
The channel and clock settings apply to both DVD and VHS drives.
Time Zone
EST (Eastern Standard Time)
GMT
5
CST (Central Standard Time)
GMT
6
MST (Mountain Standard Time)
GMT
7
PST (Pacifi c Standard Time)
GMT
8
AST (Alaska Standard Time)
GMT
9
HST (Hawaii Standard Time)
GMT
10
For other areas: xx hr
DST (Daylight Saving Time)
If you select “On”, the clock is advanced one hour beginning at
2 a.m. on the second Sunday in March and ending at 2 a.m. on the
fi rst Sunday in November.
Set the DST period manually when it varies according to regions
(
below).
To set the DST period manually
1. Press [FUNCTIONS].
2.
,
to select “Other Functions” then press [ENTER].
3.
,
to select “Setup” then press [ENTER].
4.
,
to select “Setup” then
.
5.
,
to select “Clock Settings” then press [ENTER].
6.
,
to select “Set the time change dates for DST” then press
[ENTER].
7.
,
,
to set the “Month”, “Day”, “Hour”, and “Minute” then
press [ENTER].
Setup
Setup
Audio
Display
TV Screen
VHS
Set the time change dates for DST
Channel
Disc
Video
:
SUN
2nd
AM
Month
Beginning
End
Day
Hour
Minute
3
2
00
:
SUN
1st
AM
Month
Day
Hour
Minute
11
2
00
ENTER
Restore Default
Reinitializes the
settings.
Setting the Channels and Clock
ENTER
to start automatic channel/
clock setting.
Notes
Conditions of the received channel may cause automatic channel/
clock setting to take extra time.
M5821.indb 54
M5821.indb 54
2007/05/23 15:12:58
2007/05/23 15:12:58
