file:///C|/U
...LLSVC_DSC1703003CE/viewing/SGML_VIEW_DATA/ALL/DC-GH5P/SVC/DSC1703003CE/doc/DSC1703003CE_03.xml[11/12/2018 4:23:13 PM]
Set the mode dial to [ P ] (Program AE Mode).
Step 1. The temporary cancellation of “Initial Settings”:
Set the drive mode dial to [ Single ], while pressing [ Playback ] button and [ AF/AE LOCK ] button simultaneously, turn the Power on.
Step 2. The cancellation of “Initial Settings”:
Press the [ Playback ] button in order to enter the [ Playback ] mode.
Press [ AF/AE LOCK ] button and “[ UP ] of Cursor buttons” simultaneously, then turn the power off.
The LCD displays the “ ! ” mark before the unit powers down.
Step 3. Turn the Power On:
Set the mode dial to [ P ] (Program AE Mode) and drive mode dial to [ Single ], then turn the power on.
Step 4. Display the Initial Settings:
While pressing [ MENU/SET ] button and “[ RIGHT ] of Cursor buttons” simultaneously, turn the power off.
The “Initial Settings” menu is displayed.
There are two kinds of “Initial Settings” menu form as follows:
[ CASE 1. After replacing the Main P.C.B. and/or Flash-ROM ]
When Main P.C.B. has just been replaced, 16 model suffxes are displayed as follows. (three pages in total)
[CASE 2. Other than “After replacing the Main P.C.B. and/or Flash-ROM”]
