file:///C|/U
...LLSVC_DSC1703003CE/viewing/SGML_VIEW_DATA/ALL/DC-GH5P/SVC/DSC1703003CE/doc/DSC1703003CE_03.xml[11/12/2018 4:23:13 PM]
The shutter unit supplied as service parts has affx the label of own confgure data.
By inputting second line to third line of these data into the adjustment software and writing these data to Flash-ROM (IC2003), the shutter
adjustment becomes needless.
In addition, the adjustment software can read data encoded to QR Code by using WEB camera with a close-up function.
Refer to the adjustment instruction in the adjustment software for details.
3.3.1.3 About Main P.C.B. (Ref.1) & Flash-ROM (IC2003)
Before exchanging the “Main P.C.B.”, confrm that the symptom and/or phenomenon is not due to the setting of functions.
Important:
When cannot be repaired in the IC exchange, and in the case of performing the “Main P.C.B.” exchange,
carry out any of following.
In the case of exchanging the Flash-ROM (IC2003) is same way too.
1. When the camera power can be ON, and camera body and adjustment software can be communicated:
Before replacing the “Main P.C.B. and/or Flash-ROM”, proceed the EEPROM data backup from the unit.
After replacing the Main P.C.B. and/or Flash-ROM, overwrite the EEPROM data with backup data from the unit frst,
then proceed the adjustment /inspection. (Almost adjustment/inspection items can be omitted.)
Refer to the adjustment instruction in the adjustment software for details.
2. When the camera power cannot be ON, or camera body and adjustment software cannot be communicated:
Almost full adjustment/inspection must be performed after replacing the “Main P.C.B. and/or Flash-ROM”.
Refer to the adjustment instruction in the adjustment software for details.
Notes after replacement:
Make sure the camera body frmware is latest version.
3.3.1.4 About Venus Engine (IC2001) [Located on the Main P.C.B.]:
The Venus Engine (IC2001) consists of two IC chips, which are fxed together with solder.
(The so called, “Package On Package” type IC.)
NOTE:
During servicing, do not press down hard on the surface of IC2001.
3.3.2 Lens Unit (Interchangeable Lens: H-FS12060)
3.3.2.1 About Lens Main Unit (Ref. 206)
1.
Lens Main Unit (Ref. 206) is not supplied due to diffculty of the transportation issue (Fragile, Dust-free packing), and requires critical lens
adjustments.
Therefore, any needs of the “Lens Main Unit” (Ref. 206), carefully confrm its performance in advance.
2.
Once “Lens Main Unit” (Ref. 206) is confrmed as defective, place order “Lens Unit” (Ref. 200) and replace Shading Frame (Ref. 216), to
maintain Serial number of owner’s original lens.
