7-1 Troubleshooting
164
Troubleshooting
7
Troubleshooting
This section describes the troubleshooting methods in the event of an error.
A message will be shown on the display if paper is jammed or there is an
internal machine fault. Follow the displayed instructions to identify the
problems and troubleshoot. Contact your local authorized Panasonic
service representative if any problem persists even after you have tried the
following solutions.
When an Error Message is Displayed
If error messages are displayed when an error occurred, follow the
messages to resolve the problem. If "Paper Jam" or "Document Jam" is
displayed, See
7-2: Paper Jams
or
7-3: Document Jams
for details.
When Other Problems Occurred
Check that the power switch is "|" (On).
Is the power switch in the "
" position?
Is the power cord loose?
Symptom
Check
Measure
"Ready to Copy", "Press Start
to continue or press C button to
cancel the job..." is not
displayed.
Check that the power cord is plugged in
properly.
Is the document made of a transparent
material?
Marks on the document cover are copied if
the document is made of a transparent
material such as transparency. Place a
sheet of white paper over the document.
Adjust the copy density, or select Photo
for Original Type.
•
5-2: Adjusting Copy Density (Lighter/
Darker)
Is the document colored or of a rough
texture such as pulp paper or blueprint?
There are black lines on the
copy.
Is the document glass dirty?
Clean the document glass.
•
8-1: Cleaning the Copier
The copy is too dark.
Is Lighter/Darker set at Darkest?
Select a lighter copy density setting.
•
5-2: Adjusting Copy Density (Lighter/
Darker)
The copy is dirty.
Is the document glass or the document
cover dirty?
Clean the document glass or the
document cover.
•
8-1: Cleaning the Copier
Содержание DA-FS700
