8
Basic Operations
Setting the Current Time
1. Press
for 2 seconds or
longer.
•
The time display flashes. (The colon
lights up.)
2. Press
/
to set the hour,
then press
.
3. Press
/
to set the
minutes, then press
.
Note
• If the buttons are not pressed for a
certain duration while setting the time,
the displayed time is set.
• Adjust the time periodically.
2, 3
1
2, 3
Hold the remote controller with your hand and point its transmitter at the receiver.
Power: Turn on the circuit breaker beforehand, referring to the
operating instructions for the unit.
1. Press
.
2. Press
to select the
operation mode.
• Every time you press
, it cycles
from “Auto
→ Heat → Dry →
Cool
→ Fan
”.
• Models that only provide the cooling
function cannot operate in the auto or
heating mode.
• The available functions differ depending
on the indoor unit being used.
3. Press
to select the fan speed.
• Every time you press
, it cycles
from “
→ → → → →
(Auto)”.
• Auto does not work in Fan mode.
• If the unit is not heating very effectively
with a fan speed “
”, switch the fan
speed to “ ” or “ ”.
• The available functions differ depending on the indoor unit being used.
• “
” is displayed if the function is not available.
2
4
1
3
5
Operation
CZ-RWS3_QRG.indd 8
2018/05/30 10:34:12
