background image

3

(EN)

Safety Precautions

We assume no responsibility for accidents 
or damages resulting from methods other 
than those described in the installation 
instructions or methods without using 
specifi ed parts.
Malfunctions that occurred due to the 
unauthorised installation methods are not 
covered by the product warranty.

Read the installation instructions supplied 
with indoor units as well.

After the installation is complete, 
perform test operation to confi rm that no 
abnormality is present.

When relocating or repairing this receiver, 
provide the Installation Instructions to the 
servicing personnel.

Do not clean inside the receiver by users. 
Engage authorised dealer or specialist 
for cleaning.

 WARNING

This symbol refers to a hazard or unsafe 
practice which can result in severe personal 
injury or death.

 CAUTION

This symbol refers to a hazard or unsafe 
practice which can result in personal injury or 
product or property damage.

 WARNING

Turn off  the circuit breaker of 
the units before installation.

This receiver shall be installed 
in accordance with National 
Wiring Regulations.

Connect and fi x the specifi ed 
cables for wiring securely.

Do not allow the connection 
to be exposed to the external 
force of the cables.

Select an installation location 
which is rigid and strong 
enough to support or hold the 
receiver, and select a location 
for easy maintenance.

This receiver must not be 
modifi ed or disassembled 
under any circumstances. 
Modifi ed or disassembled 
receiver may cause fi re, 
electric shock or injury.

Read before installation

This receiver must be installed by the sales dealer or installer.
These instructions are all you need for most installation sites and maintenance conditions. 
If you require help for a special problem, contact our sales/service outlet or your certifi ed 
dealer for additional instructions.

Содержание CZ-RWRU3













Отзывы: