Panasonic CZ-CSRC3, Руководство по обслуживанию

Страница: 51 / 68

Optional Controller
Manual of Controller
2 - 33
2. Wireless Remote Controller
( CZ-RWSU2N, CZ-RWSD2, CZ-RWST3N, CZ-RWSL2N )
ENGLISH
13
(EN)
If the unit is not heating very effectively with a Low fan speed
, switch
the fan speed to High
or Medium
.
Depending on the indoor unit being used, it may indicate a function that it does not have. (The fan speed is constant.) If you cannot turn the air conditioner off in the normal way Disconnect the power to the indoor unit and contact the distributor where the product was purchased. <Auto operation> Only when identical refrigerant system inside all the indoor units or cooling/ heating free-type are under control as one group. It heats or cools automatically via the dif
ferences between the set temperature and the room
temperature. <Dry operation> •
Depending on the indoor unit used, the remote controller may ha
ve a [Dry]
indicator on its display even though the unit does not have the Dry
function. (Same as cooler operation)
•
When the room temperature approaches the temperature setting, t
he unit
continues to start up or stop automatically
.
•
When the drying mode stops operating, the indoor unit’
s fan blows a gentle
breeze in order to keep the moisture from returning to the room at a minimum.
•
Depending on the indoor unit used, and/or the temperature in th
e room, the
fan speed may not be adjustable.
•
Depending on the unit used, when the outside air temperature i
s 15 °C or
less, the dry function will not operate.
5. Operation (Cont.)
00̲OI̲303000.indb 13
2015/02/20 16:23:04
5. Operation
12
(EN)
Power:
Turn on the circuit breaker beforehand, referring to the operating instructions for the unit.
1. Press
.
2. Press
and select from among
Auto
, Heat
, Dry
, Cool
and Fan
.
3. Press
and select the desired speed.
If set to
Auto
, the fan speed switches
automatically
. (Auto does not work in Fan
mode.)
4.
Press one of the
buttons
and set the desired temperature.
Temperature settings cannot be made in Fan mode.
MAX (°C)
MIN (°C)
Auto
27
17
Heat
30
16
Dry
/ Cool
30
18
Stop: Press
.
When the unit is stopped with the remote controller
, the fan on the outdoor
unit may continue to run for a while, even though the compressor of the outdoor unit stops.
Auto
, Heat
, Dry
, Cool
, Fan
Models that only provide the cooling function cannot operate in the auto or heating mode.
1 4 2
3
00̲OI̲303000.indb 12
2015/02/20 16:23:03
SM830241-00_2WAY SYS.indb 33 2015/03/26 14:55:10