background image

4

 Safety precautions

To prevent personal injury, injury to others or property 
damage, please comply with the following: 
Incorrect operation due to failure to follow instructions 
below may cause harm or damage, the seriousness of 
which is classifi ed as below:
This appliances is not intended for accessibility by the 
general public.

WARNING

This sign warns of death 
or serious injury.

CAUTION

This sign warns of injury 
or damage to property.

The instructions to be followed are classifi ed by the 
following symbols:

This symbol denotes an action that 
is PROHIBITED.

These symbols denote actions 
COMPULSORY.

WARNING

Indoor unit and outdoor unit

This appliance is not intended for use by 
persons (including children) with reduced 
physical, sensory or mental capabilities, or 
lack of experience and knowledge, unless they 
have been given supervision or instruction 
concerning use of the appliance by a person 
responsible for their safety. Children should be 
supervised to ensure that they do not play with 
the appliance.

Please consult authorised dealer or specialist 
to clean the internal parts, repair, install, 
remove and reinstall the unit. Improper 
installation and handling will cause leakage, 
electric shock or fi re.

Confi rm with authorised dealer or specialist on 
usage of any specifi ed refrigerant type. Using 
refrigerant type other than the specifi ed may 
cause product damage, burst and injury etc.

Do not use means to accelerate the defrosting 
process or to clean, other than those 
recommended by manufacturer.
Any unfi t method or using incompatible material 
may cause product damage, burst and serious 
injury.

Do not install the unit in a potentially explosive 
or fl ammable atmosphere.
Failure to do so could result in fi re.
Do not insert your fi ngers or other 
objects into the air conditioner indoor or 
outdoor unit, rotating parts may cause 
injury.

Do not touch the outdoor unit during lightning, it 
may cause electric shock.

Do not expose yourself directly to cold air for a 
long period to avoid excess cooling.

Do not sit or step on the unit, you may 
fall down accidentally.

Remote control

Do not allow infants and small children to play 
with the remote control to prevent them from 
accidentally swallowing the batteries.

Power supply

Do not use a modifi ed cord, 
joint cord, extension cord or 
unspecifi ed cord to prevent 
overheating and fi re.

  

To prevent overheating, fi re or electric shock:
• Do not share the same power outlet with other 

equipment.

• Do not operate with wet hands.
• Do not over bend the power supply cord.
• Do not operate or stop the unit by inserting or 

pulling out the power plug.

Indoor unit

Outdoor unit

Power supply

Remote control

Air inlet

Air inlet

Air inlet

Air inlet

Air outlet

Air outlet

Air outlet

Air outlet

Содержание CS-Z20VKR





















Отзывы: