background image

5

English

Safety precautions

If the supply cord is damaged, it must be 
replaced by the manufacturer, service agent 
or similarly qualifi ed persons in order to avoid 
a hazard.

It is strongly recommended to be installed 
with Earth Leakage Circuit Breaker (ELCB) 
or Residual Current Device (RCD) to prevent 
electric shock or fi re.

To prevent overheating, fi re or electric shock:
• Insert the power plug properly.
• Dust on the power plug should be periodically 

wiped with a dry cloth.

Stop using the product if any abnormality/
failure occurs and disconnect the power plug or 
turn off the power switch and breaker.
(Risk of smoke/fi re/electric shock)
Examples of abnormality/failure
• The ELCB trips frequently.
• Burning smell is observed.
• Abnormal noise or vibration of the unit is 

observed.

• Water leaks from the indoor unit.
• Power cord or plug becomes abnormally hot.
• Fan speed cannot be controlled.
• The unit stops running immediately even if it 

is switched on for operation.

• The fan does not stop even if the operation 

is stopped.

Contact your local dealer immediately for 
maintenance/repair.

This equipment must be earthed to prevent 
electrical shock or fi re.

Prevent electric shock by switching off the 
power supply and unplug:

 

- Before cleaning or servicing,

 

- When extended non-use, or

 

- During abnormally strong lightning activity.

CAUTION

Indoor unit and outdoor unit

Do not wash the indoor unit with water, 
benzine, thinner or scouring powder to avoid 
damage or corrosion at the unit.

Do not use for preservation of precise 
equipment, food, animals, plants, artwork 
or other objects. This may cause quality 
deterioration, etc.
Do not use any combustible equipment in front 
of the airfl ow outlet to avoid fi re propagation.

Do not expose plants or pet directly to airfl ow to 
avoid injury, etc.

Do not touch the sharp aluminium fi n, 
sharp parts may cause injury.

Do not switch ON the indoor unit when waxing 
the fl oor. After waxing, aerate the room properly 
before operating the unit.
Do not install the unit in oily and smoky areas 
to prevent damage to the unit.
Do not dismantle the unit for cleaning purpose 
to avoid injury.
Do not step onto an unstable bench when 
cleaning the unit to avoid injury.
Do not place a vase or water container on the 
unit. Water may enter the unit and degrade the 
insulation. This may cause an electric shock.
Do not open window or door for long time during 
operation, it may lead to ineffi cient power usage 
and uncomfortable temperature changes.

Prevent water leakage by ensuring drainage pipe is:

 

- Connected properly,

 

- Kept clear of gutters and containers, or

 

- Not immersed in water

After a long period of use or use with any 
combustible equipment, aerate the room regularly.

After a long period of use, make sure the 
installation rack does not deteriorate to prevent 
the unit from falling down.

Remote control

Do not use rechargeable (Ni-Cd) batteries. It 
may damage the remote control.

To prevent malfunction or damage of the 
remote control:
• Remove the batteries if the unit is not going to 

be used for a long period of time.

• New batteries of the same type must be 

inserted following the polarity stated.

Power supply

Do not disconnect the plug by pulling the cord 
to prevent electric shock.

nanoe-G generator

Do not touch the sharp pin which may cause 
injury.

Содержание CS-Z20VKR





















Отзывы: