Panasonic CS-YW9GKE, Руководство по обслуживанию

Страница: 39 / 59

39
13.3. Remote Control Button
13.3.1. SET BUTTON
• To change the type of remote transmission signal.
(There are totally four types of transmission code).
- Modify the Jumper (back of PCB) and connector (front of PCB) at remote control PCB.
- Press with pointer for more than 10 seconds.
- Face the transmitter toward indoor unit receiver and press the timer SET button (to send the signal) or if the timer SET button
is not pressed for 30 seconds, the setting mode is cancelled.
- Press timer CANCEL button to exit the setting mode.
13.3.2. CLOCK BUTTON
• To change the remote control’s time format.
- Press for more than 5 seconds.
13.3.3. RESET (RC)
• To clear and restore the remote control setting to factory default.
- Press once to clear the memory.
13.3.4. TIMER
• To change indoor unit indicator’s LED intensity.
- Press continuously for 5 seconds.
13.3.5. TIMER
• To change remote control display from Degree Celsius to Degree Fahrenheit.
- Press continuously for 10 seconds.