Panasonic CS-RZ25TKR Скачать руководство пользователя страница 8

Страница: 8 / 16

How to use

ECONOMY

i AUTO-X

To adjust fan speed

• For AUTO, the indoor fan speed is automatically

adjusted according to the operation mode.

• If i AUTO-X mode is set, fan speed is

xed to AUTO.

To adjust fan speed, cancel i AUTO-X mode.

AUTO

FAN

FAN SPEED

To adjust air

ow direction

• Do not adjust the

ap by hand.

To adjust air

ow direction

• For lateral direction, it is manually

adjustable as shown.

AIR SWING

Upper direction

To save electrical power consumption

• Save power consumption at unoccupied room by

adjust set temperature up to 3°C automatically.

• Brightness of all indicators will be dimmed.

ECONOMY

• The unit controls set temperature according to room

temperature to accelerate room cooling.

• After max 4 hours, the set temperature follows the

last set temperature setting.

• Fan speed is

xed at AUTO, fan speed selection is

prohibited.

• During unit is off, press

will turn on the unit

with i AUTO-X mode.

• i AUTO-X mode can be cancelled by pressing the

respective button again.

To reach temperature quickly

Set

temperature

i AUTO-X

Max = 4 hours

-1°C /

-2°F

Indicator

POWER

TIMER

i AUTO-X

ECONOMY

FAN SPEED

AIR SWING

ECONOMY

OFF

SET

CANCEL

TIMER

TEMP

OFF/ON

MODE

Not used

in normal

operations.

Press to restore

the remote

control to default

setting.

ACXF55-11360_SM0717-0_EN.indd 8

13/6/2017 11:54:31 AM

Содержание CS-RZ25TKR

















Результаты поиска

Содержание CS-RZ25TKR

Отзывы:

Бренды по названию

Популярные бренды

Panasonic CS-RZ25TKR, Руководство по эксплуатации

Результаты поиска

Содержание CS-RZ25TKR

Отзывы:

Бренды по названию

Популярные бренды