Panasonic CS-RZ25TKR Скачать руководство пользователя страница 7

7

English

CAUTION

Indoor unit and outdoor unit

Do not wash the indoor unit 

with water, benzine, thinner 

or scouring powder to avoid 

damage or corrosion at the unit.
Do not use for preservation 

of precise equipment, food, 

animals, plants, artwork or other 

objects. This may cause quality 

deterioration, etc.
Do not use any combustible 

equipment in front of the air

fl

 ow 

outlet to avoid 

fi

 re propagation.

Do not expose plants or pet 

directly to air

fl

 ow to avoid injury, 

etc.
Do not touch the sharp 

aluminium 

fi

 n, sharp parts 

may cause injury.
Do not switch ON the indoor 

unit when waxing the 

fl

 oor. After 

waxing, aerate the room properly 

before operating the unit.
Do not install the unit in oily and 

smoky areas to prevent damage 

to the unit.
Do not dismantle the unit for 

cleaning purpose to avoid injury.
Do not step onto an unstable 

bench when cleaning the unit to 

avoid injury.

 Safety precautions

Do not place a vase or water 

container on the unit. Water may 

enter the unit and degrade the 

insulation. This may cause an 

electric shock.
Do not open window or door 

for long time during operation, 

it may lead to inef

fi

 cient power 

usage and uncomfortable 

temperature changes.
Prevent water leakage by 

ensuring drainage pipe is:

 

-Connected properly,

 

- Kept clear of gutters and 

containers, or

 

-Not immersed in water
After a long period of use or use 

with any combustible equipment, 

aerate the room regularly.
After a long period of use, make 

sure the installation rack does 

not deteriorate to prevent the unit 

from falling down.

Remote control

Do not use rechargeable (Ni-Cd) 

batteries. It may damage the 

remote control.
To prevent malfunction or 

damage of the remote control:

• Remove the batteries if the unit 

is not going to be used for a 

long period of time.

• New batteries of the same type 

must be inserted following the 

polarity stated.

Power supply

Do not disconnect the plug 

by pulling the cord to prevent 

electric shock.

Do not pierce or burn as the 

appliance is pressurized. Do not 

expose the appliance to heat, 

fl

 ame, sparks, or other sources 

of ignition. Else it may explode 

and cause injury or death.

ACXF55-11360_SM0717-0_EN.indd   7

ACXF55-11360_SM0717-0_EN.indd   7

13/6/2017   11:54:31 AM

13/6/2017   11:54:31 AM

Содержание CS-RZ25TKR

















Отзывы: