8.8
About Cursor Key Which Points To “OFF” On Remote Control
1.
2.
When the ON/OFF button on the remote control is pressed, the cursor key which points to “OFF” will appear or
disappear to indicate the ON/OFF status of the air conditioner.
The air conditioner is running but the cursor key which points to “OFF” appears. The air conditioner can be
stopped with any button (Except for “ON/OFF”, “TIMER SET”, “TIMER ON”) pressed.
The air conditioner is on standby, but the cursor key which points to “OFF” disappears. The air conditioner can
be started with any button(Except for “ON/OFF”, “TIMER SET”, “TIMER OFF”) pressed.
For some reason (Ex. The signal of the remote control does not reach the signal receiver of the indoor unit.), the
display of the remote control will not correspond with the actual ON/OFF status of the indoor unit:
23
8.9.
Indoor Fan Motor Control
Automatic fan speed control
When automatic fan speed set, the available range for fan speed is from Hi to Slo.
Basic Fan Speed
Cooling Mode
Operation
Soft Dry
Operation
Manual
Auto
Category
Hi
Me
Lo
Lo-
Manual
Auto
Manual Fan Speed Control
Basic fan speed can be manually adjusted (Lo, Med, Hi) by using the fan speed selection button.
Manual
Auto
SLo
SSLo
Heating Mode
Operation
8.10.
Auto restart control
If the operation is stopped due to a power failure u
, it will restart automatically
un der the previous operation mode when the power supply is resumed.
nder any operation mode
PRESS "OFF/ON" BUTTON
AUTO
STD
FAN
SPEED
AIR
SWING
AUTO
AUTO
COOL
DRY
FAN
OFF
AUTO
COOL
DRY
FAN
OFF
AUTO
STD
FAN
SPEED
AIR
SWING
AUTO
CS-PC9DKV / CU-PC9DKV / CS-PC12DKV / CU-PC12DKV
